#include "system/includes.h" #include "media/includes.h" #include "app_config.h" #include "app_task.h" #include "btstack/avctp_user.h" #include "btstack/btstack_task.h" #include "btstack/bluetooth.h" #include "btstack/btstack_error.h" #include "btctrler/btctrler_task.h" #include "classic/hci_lmp.h" #include "bt_ble.h" #include "bt_common.h" #include "spp_user.h" #include "app_chargestore.h" #include "app_charge.h" #include "app_main.h" #include "app_power_manage.h" #include "user_cfg.h" #include "asm/pwm_led.h" #include "system/timer.h" #include "asm/hwi.h" #include "cpu.h" #include "ui/ui_api.h" #include "tone_player.h" #include "bt_edr_fun.h" #include "adapter_process.h" //#include "adapter_decoder.h" #include "aec_user.h" #include "ui_manage.h" #if TCFG_WIRELESS_MIC_ENABLE #define LOG_TAG_CONST WIRELESSMIC #define LOG_TAG "[BT]" #define LOG_ERROR_ENABLE #define LOG_DEBUG_ENABLE #define LOG_INFO_ENABLE #define LOG_DUMP_ENABLE #define LOG_CLI_ENABLE #include "debug.h" struct app_bt_opr app_bt_hdl = { .exit_flag = 1, .replay_tone_flag = 1, .esco_dump_packet = ESCO_DUMP_PACKET_CALL, .hid_mode = 0, .wait_exit = 0, }; #define __this (&app_bt_hdl) extern BT_USER_PRIV_VAR bt_user_priv_var; u8 get_bt_init_status(void) { return __this->init_ok; } u8 is_call_now(void) { if (get_call_status() != BT_CALL_HANGUP) { return 1; } return 0; } /*----------------------------------------------------------------------------*/ /**@brief 蓝牙模式led状态更新 @param @return status : 蓝牙状态 @note */ /*----------------------------------------------------------------------------*/ void bt_set_led_status(u8 status) { #if 1 static u8 bt_status = STATUS_BT_INIT_OK; if (status) { bt_status = status; } pwm_led_mode_set(PWM_LED_ALL_OFF); ui_update_status(bt_status); #endif } /*----------------------------------------------------------------------------*/ /**@brief 蓝牙spp 协议数据 回调 @param packet_type:数据类型 ch : packet :数据缓存 size ：数据长度 @return @note */ /*----------------------------------------------------------------------------*/ static void spp_data_handler(u8 packet_type, u16 ch, u8 *packet, u16 size) { switch (packet_type) { case 1: log_debug("spp connect\n"); break; case 2: log_debug("spp disconnect\n"); break; case 7: //log_info("spp_rx:"); //put_buf(packet,size); #if AEC_DEBUG_ONLINE aec_debug_online(packet, size); #endif break; } } /*----------------------------------------------------------------------------*/ /**@brief 蓝牙获取在连接设备名字回调 @param status : 1：获取失败 0：获取成功 addr : 配对设备地址 name :配对设备名字 @return @note 需要连接上设备后发起USER_CTRL_READ_REMOTE_NAME 命令来 */ /*----------------------------------------------------------------------------*/ __attribute__((weak)) void remote_name_speciali_deal(u8 status, u8 *addr, u8 *name) { } static void bt_read_remote_name(u8 status, u8 *addr, u8 *name) { if (status) { log_debug("remote_name fail \n"); } else { log_debug("remote_name : %s \n", name); } log_debug_hexdump(addr, 6); remote_name_speciali_deal(status, addr, name); } /*----------------------------------------------------------------------------*/ /**@brief 蓝牙歌词信息获取回调 @param @return @note const u8 more_avctp_cmd_support = 1;置上1 需要在void bredr_handle_register()注册回调函数 要动态获取播放时间的，可以发送USER_CTRL_AVCTP_OPID_GET_PLAY_TIME命令就可以了 要半秒或者1秒获取就做个定时发这个命令 */ /*----------------------------------------------------------------------------*/ static void user_get_bt_music_info(u8 type, u32 time, u8 *info, u16 len) { //profile define type: 1-title 2-artist name 3-album names 4-track number 5-total number of tracks 6-genre 7-playing time //JL define 0x10-total time , 0x11 current play position u8 min, sec; //printf("type %d\n", type ); if ((info != NULL) && (len != 0)) { log_debug(" %s \n", info); } if (time != 0) { min = time / 1000 / 60; sec = time / 1000 - (min * 60); log_debug(" time %d %d\n ", min, sec); } } //音量同步 static void vol_sys_tab_init(void) { } static void bt_set_music_device_volume(int volume) { r_printf("bt_set_music_device_volume : %d\n", volume); } static int phone_get_device_vol(void) { //音量同步最大是127，请计数比例 #if 0 return (app_var.sys_vol_l * get_max_sys_vol() / 127) ; #else return app_var.opid_play_vol_sync; #endif } /*----------------------------------------------------------------------------*/ /**@brief 蓝牙模式协议栈功能配置 @param 无 @return 无 @note */ /*----------------------------------------------------------------------------*/ static void bt_function_select_init() { set_idle_period_slot(1600); ////设置协议栈支持设备数 __set_user_ctrl_conn_num(TCFG_BD_NUM); ////msbc功能使能 __set_support_msbc_flag(1); #if TCFG_BT_SUPPORT_AAC ////AAC功能使能 __set_support_aac_flag(1); #else __set_support_aac_flag(0); #endif #if BT_SUPPORT_DISPLAY_BAT ////设置更新电池电量的时间间隔 __bt_set_update_battery_time(60); #else __bt_set_update_battery_time(0); #endif ////回连搜索时间长度设置,可使用该函数注册使用，ms单位,u16 __set_page_timeout_value(8000); ////回连时超时参数设置。ms单位。做主机有效 __set_super_timeout_value(8000); #if (TCFG_BD_NUM == 2) ////设置开机回链的设备个数 __set_auto_conn_device_num(2); #endif #if BT_SUPPORT_MUSIC_VOL_SYNC ////设置音乐音量同步的表 vol_sys_tab_init(); #endif ////设置蓝牙是否跑后台 __set_user_background_goback(BACKGROUND_GOBACK); // 后台链接是否跳回蓝牙 1:跳回 ////设置蓝牙加密的level //io_capabilities ; /*0: Display only 1: Display YesNo 2: KeyboardOnly 3: NoInputNoOutput*/ //authentication_requirements: 0:not protect 1 :protect __set_simple_pair_param(3, 0, 2); #if (USER_SUPPORT_PROFILE_PBAP==1) ////设置蓝牙设备类型 __change_hci_class_type(BD_CLASS_CAR_AUDIO); #endif #if (TCFG_BT_SNIFF_ENABLE == 0) void lmp_set_sniff_disable(void); lmp_set_sniff_disable(); #endif /* TX RX AI800x PA13 PA12 AC692x PA13 PA12 AC693x PA8 PA9 AC695x PA9 PA10 AC696x PA9 PA10 AC694x PB1 PB2 AC697x PC2 PC3 AC631x PA7 PA8 */ ////设置蓝牙接收状态io输出，可以外接pa /* bt_set_rxtx_status_enable(1); */ #if TCFG_USER_BLE_ENABLE { u8 tmp_ble_addr[6]; lib_make_ble_address(tmp_ble_addr, (void *)bt_get_mac_addr()); le_controller_set_mac((void *)tmp_ble_addr); printf("\n-----edr + ble 's address-----"); printf_buf((void *)bt_get_mac_addr(), 6); printf_buf((void *)tmp_ble_addr, 6); } #endif // TCFG_USER_BLE_ENABLE #if (CONFIG_BT_MODE != BT_NORMAL) set_bt_enhanced_power_control(1); #endif } extern u8 get_cur_battery_level(void); static int bt_get_battery_value() { //取消默认蓝牙定时发送电量给手机，需要更新电量给手机使用USER_CTRL_HFP_CMD_UPDATE_BATTARY命令 /*电量协议的是0-9个等级，请比例换算*/ return get_cur_battery_level(); } /*----------------------------------------------------------------------------*/ /**@brief 蓝牙模式协议栈回调函数 @param 无 @return 无 @note */ /*----------------------------------------------------------------------------*/ static void bredr_handle_register() { #if (USER_SUPPORT_PROFILE_SPP==1) #if APP_ONLINE_DEBUG extern void online_spp_init(void); spp_data_deal_handle_register(user_spp_data_handler); online_spp_init(); #else spp_data_deal_handle_register(spp_data_handler); #endif #endif #if BT_SUPPORT_MUSIC_VOL_SYNC ///蓝牙音乐和通话音量同步 music_vol_change_handle_register(bt_set_music_device_volume, phone_get_device_vol); #endif #if BT_SUPPORT_DISPLAY_BAT ///电量显示获取电量的接口 get_battery_value_register(bt_get_battery_value); #endif extern void bt_fast_test_api(void); ///被测试盒链接上进入快速测试回调 bt_fast_test_handle_register(bt_fast_test_api); //extern void bt_dut_api(u8 value); ///样机进入dut被测试仪器链接上回调 //bt_dut_test_handle_register(bt_dut_api); ///获取远端设备蓝牙名字回调 read_remote_name_handle_register(bt_read_remote_name); ////获取歌曲信息回调 /* bt_music_info_handle_register(user_get_bt_music_info); */ } /*----------------------------------------------------------------------------*/ /**@brief 蓝牙直接开关 @param @return @note 如果想后台开机不需要进蓝牙，可以在poweron模式 直接调用这个函数初始化蓝牙 */ /*----------------------------------------------------------------------------*/ extern void sys_auto_shut_down_enable(void); extern void sys_auto_sniff_controle(u8 enable, u8 *addr); void bt_init() { if (__this->bt_direct_init) { return; } log_info(" bt_direct_init \n"); u32 sys_clk = clk_get("sys"); bt_pll_para(TCFG_CLOCK_OSC_HZ, sys_clk, 0, 0); __this->ignore_discon_tone = 0; __this->bt_direct_init = 1; bt_function_select_init(); bredr_handle_register(); btstack_init(); /* 按键消息使能 */ sys_key_event_enable(); sys_auto_shut_down_enable(); sys_auto_sniff_controle(1, NULL); } /*----------------------------------------------------------------------------*/ /**@brief 蓝牙 退出蓝牙等待蓝牙状态可以退出 @param @return @note */ /*----------------------------------------------------------------------------*/ static void bt_close_check(void *priv) { if (bt_user_priv_var.auto_connection_timer) { sys_timeout_del(bt_user_priv_var.auto_connection_timer); bt_user_priv_var.auto_connection_timer = 0; } if (__this->init_ok == 0) { /* putchar('#'); */ return; } // if (bt_audio_is_running()) { // /* putchar('$'); */ // return; // } #if TCFG_USER_BLE_ENABLE bt_ble_exit(); #endif btstack_exit(); log_info(" bt_direct_close_check ok\n"); sys_timer_del(__this->timer); __this->init_ok = 0; __this->init_start = 0; __this->timer = 0; __this->bt_direct_init = 0; set_stack_exiting(0); } /*----------------------------------------------------------------------------*/ /**@brief 蓝牙后台直接关闭 @param @return @note */ /*----------------------------------------------------------------------------*/ void bt_close(void) { if (__this->init_ok == 0) { /* putchar('#'); */ return; } log_info(" bt_direct_close"); __this->ignore_discon_tone = 1; sys_auto_shut_down_disable(); set_stack_exiting(1); user_send_cmd_prepare(USER_CTRL_WRITE_SCAN_DISABLE, 0, NULL); user_send_cmd_prepare(USER_CTRL_WRITE_CONN_DISABLE, 0, NULL); user_send_cmd_prepare(USER_CTRL_PAGE_CANCEL, 0, NULL); user_send_cmd_prepare(USER_CTRL_CONNECTION_CANCEL, 0, NULL); user_send_cmd_prepare(USER_CTRL_POWER_OFF, 0, NULL); if (__this->timer == 0) { __this->tmr_cnt = 0; __this->timer = sys_timer_add(NULL, bt_close_check, 10); printf("set exit timer\n"); } } #endif