diff --git a/Makefile b/Makefile index bf77979..afe1c7b 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,14 @@ -# make 编译并下载 +# make 编译并下载，成功后自动打包到 release/ +# make pack 仅打包（需已编译生成 jl_isd.fw） # make VERBOSE=1 显示编译详细过程 # make clean 清除编译临时文件 # +# USB 烧录（两套镜像都会生成，只烧其中一套）： +# .\build.bat 或 .\build.bat nokey -> 烧不带 Key +# .\build.bat key -> 烧带 Key +# make BURN_KEY=1 与 build.bat key 相同 +# # 注意： Linux 下编译方式： # 1. 从 http://pkgman.jieliapp.com/doc/all 处找到下载链接 # 2. 下载后，解压到 /opt/jieli 目录下，保证 @@ -31,6 +37,11 @@ export PATH:=$(TOOL_DIR);$(PATH) FIXBAT := tools\utils\fixbat.exe # 用于处理 utf8->gbk 编码问题 POST_SCRIPT := cpu/br28/tools/download.bat RUN_POST_SCRIPT := cpu\br28\tools\download.bat +PACK_SCRIPT := powershell -NoProfile -ExecutionPolicy Bypass -File tools\pack_firmware.ps1 +# USB: 1/key/yes = flash keyed image; default = nokey +ifneq ($(filter 1 key yes,$(BURN_KEY)),) +export JL_BURN_KEY := 1 +endif else # Linux 下工具链位置 TOOL_DIR := /opt/jieli/pi32v2/bin @@ -53,6 +64,7 @@ export PATH:=$(TOOL_DIR):$(PATH) FIXBAT := touch # Linux下不需要处理 bat 编码问题 POST_SCRIPT := cpu/br28/tools/download.sh RUN_POST_SCRIPT := bash $(POST_SCRIPT) +PACK_SCRIPT := endif CC := $(TOOL_DIR)/$(CC) @@ -266,17 +278,9 @@ c_SRC_FILES := \ apps/common/audio/audio_utils.c \ apps/common/audio/decode/audio_key_tone.c \ apps/common/audio/decode/decode.c \ - apps/common/audio/demo/audio_demo.c \ - apps/common/audio/online_debug/aud_data_export.c \ - apps/common/audio/online_debug/aud_mic_dut.c \ - apps/common/audio/online_debug/aud_spatial_effect_dut.c \ - apps/common/audio/online_debug/audio_online_debug.c \ apps/common/audio/sine_make.c \ apps/common/audio/uartPcmSender.c \ - apps/common/audio/wm8978/iic.c \ - apps/common/audio/wm8978/wm8978.c \ apps/common/bt_common/bt_test_api.c \ - apps/common/cJSON/cJSON.c \ apps/common/config/app_config.c \ apps/common/config/bt_profile_config.c \ apps/common/config/ci_transport_uart.c \ @@ -286,35 +290,6 @@ c_SRC_FILES := \ apps/common/dev_manager/dev_manager.c \ apps/common/dev_manager/dev_reg.c \ apps/common/dev_manager/dev_update.c \ - apps/common/device/gSensor/SC7A20.c \ - apps/common/device/gSensor/STK8321.c \ - apps/common/device/gSensor/da230.c \ - apps/common/device/gSensor/gSensor_manage.c \ - apps/common/device/gSensor/mpu6050.c \ - apps/common/device/gx8002_npu/gx8002_enc/gx8002_enc.c \ - apps/common/device/gx8002_npu/gx8002_npu.c \ - apps/common/device/gx8002_npu/gx8002_npu_event_deal.c \ - apps/common/device/gx8002_npu/gx8002_upgrade/app_upgrade/gx_uart_upgrade_app.c \ - apps/common/device/gx8002_npu/gx8002_upgrade/app_upgrade/gx_uart_upgrade_tws.c \ - apps/common/device/gx8002_npu/gx8002_upgrade/gx_uart_upgrade.c \ - apps/common/device/gx8002_npu/gx8002_upgrade/gx_uart_upgrade_porting.c \ - apps/common/device/gx8002_npu/gx8002_upgrade/sdfile_upgrade/gx_uart_upgrade_sdfile.c \ - apps/common/device/gx8002_npu/gx8002_upgrade/spp_upgrade/gx_fifo.c \ - apps/common/device/gx8002_npu/gx8002_upgrade/spp_upgrade/gx_uart_upgrade_spp.c \ - apps/common/device/imu_sensor/icm_42670p/icm_42670p.c \ - apps/common/device/imu_sensor/icm_42670p/inv_imu_apex.c \ - apps/common/device/imu_sensor/icm_42670p/inv_imu_driver.c \ - apps/common/device/imu_sensor/icm_42670p/inv_imu_transport.c \ - apps/common/device/imu_sensor/imuSensor_manage.c \ - apps/common/device/imu_sensor/lsm6dsl/lsm6dsl.c \ - apps/common/device/imu_sensor/mpu6887/mpu6887p.c \ - apps/common/device/imu_sensor/mpu9250/mpu9250.c \ - apps/common/device/imu_sensor/qmi8658/qmi8658c.c \ - apps/common/device/imu_sensor/sh3001/sh3001.c \ - apps/common/device/in_ear_detect/in_ear_detect.c \ - apps/common/device/in_ear_detect/in_ear_manage.c \ - apps/common/device/ir_sensor/ir_manage.c \ - apps/common/device/ir_sensor/jsa1221.c \ apps/common/device/key/adkey.c \ apps/common/device/key/adkey_rtcvdd.c \ apps/common/device/key/ctmu_touch_key.c \ @@ -324,7 +299,6 @@ c_SRC_FILES := \ apps/common/device/key/touch_key.c \ apps/common/device/key/uart_key.c \ apps/common/device/norflash/norflash_sfc.c \ - apps/common/device/ntc/ntc_det.c \ apps/common/device/usb/device/cdc.c \ apps/common/device/usb/device/descriptor.c \ apps/common/device/usb/device/hid.c \ @@ -346,43 +320,11 @@ c_SRC_FILES := \ apps/common/device/usb/host/usb_storage.c \ apps/common/device/usb/usb_config.c \ apps/common/device/usb/usb_host_config.c \ - apps/common/ezxml/ezxml.c \ - apps/common/ezxml/ezxml_example.c \ apps/common/fat_nor/cfg_private.c \ apps/common/fat_nor/virfat_flash.c \ apps/common/file_operate/file_bs_deal.c \ apps/common/file_operate/file_manager.c \ - apps/common/icsd/adt/icsd_adt.c \ - apps/common/icsd/adt/icsd_adt_app.c \ - apps/common/icsd/anc/icsd_anc_app.c \ - apps/common/icsd/anc/icsd_anc_board.c \ - apps/common/icsd/anc/icsd_anc_data.c \ - apps/common/jl_kws/jl_kws_algo.c \ - apps/common/jl_kws/jl_kws_audio.c \ - apps/common/jl_kws/jl_kws_event.c \ - apps/common/jl_kws/jl_kws_main.c \ - apps/common/music/breakpoint.c \ - apps/common/music/music_decrypt.c \ - apps/common/music/music_id3.c \ - apps/common/music/music_player.c \ apps/common/temp_trim/dtemp_pll_trim.c \ - apps/common/test/fs_test.c \ - apps/common/test/os_test.c \ - apps/common/third_party_profile/Tecent_LL/tecent_ll_demo/ll_demo.c \ - apps/common/third_party_profile/Tecent_LL/tecent_ll_demo/ll_task.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_import.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_llsync_data.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_llsync_device.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_llsync_event.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_llsync_ota.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_service.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_template.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_utils_base64.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_utils_crc.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_utils_hmac.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_utils_log.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_utils_md5.c \ - apps/common/third_party_profile/Tecent_LL/tecent_protocol/ble_qiot_utils_sha1.c \ apps/common/third_party_profile/common/3th_profile_api.c \ apps/common/third_party_profile/common/custom_cfg.c \ apps/common/third_party_profile/common/mic_rec.c \ @@ -399,7 +341,6 @@ c_SRC_FILES := \ apps/common/third_party_profile/jieli/JL_rcsp/adv_app_setting/adv_anc_voice_key.c \ apps/common/third_party_profile/jieli/JL_rcsp/adv_app_setting/adv_bt_name_setting.c \ apps/common/third_party_profile/jieli/JL_rcsp/adv_app_setting/adv_eq_setting.c \ - apps/common/third_party_profile/jieli/JL_rcsp/adv_app_setting/adv_hearing_aid_setting.c \ apps/common/third_party_profile/jieli/JL_rcsp/adv_app_setting/adv_high_low_vol_setting.c \ apps/common/third_party_profile/jieli/JL_rcsp/adv_app_setting/adv_key_setting.c \ apps/common/third_party_profile/jieli/JL_rcsp/adv_app_setting/adv_led_setting.c \ @@ -416,85 +357,26 @@ c_SRC_FILES := \ apps/common/third_party_profile/jieli/JL_rcsp/rcsp_updata/rcsp_adv_user_update.c \ apps/common/third_party_profile/jieli/JL_rcsp/rcsp_updata/rcsp_ch_loader_download.c \ apps/common/third_party_profile/jieli/JL_rcsp/rcsp_updata/rcsp_user_update.c \ - apps/common/third_party_profile/jieli/le_hogp.c \ apps/common/third_party_profile/jieli/online_db/online_db_deal.c \ apps/common/third_party_profile/jieli/online_db/spp_online_db.c \ - apps/common/third_party_profile/jieli/trans_data_demo/le_trans_data.c \ - apps/common/third_party_profile/jieli/trans_data_demo/spp_trans_data.c \ - apps/common/third_party_profile/jieli/wireless_mic/le_wireless_mic_client.c \ - apps/common/third_party_profile/jieli/wireless_mic/le_wireless_mic_server.c \ - apps/common/third_party_profile/tuya_protocol/app/demo/tuya_ble_app_demo.c \ - apps/common/third_party_profile/tuya_protocol/app/demo/tuya_ota.c \ - apps/common/third_party_profile/tuya_protocol/app/product_test/tuya_ble_app_production_test.c \ - apps/common/third_party_profile/tuya_protocol/app/uart_common/tuya_ble_app_uart_common_handler.c \ - apps/common/third_party_profile/tuya_protocol/extern_components/mbedtls/aes.c \ - apps/common/third_party_profile/tuya_protocol/extern_components/mbedtls/ccm.c \ - apps/common/third_party_profile/tuya_protocol/extern_components/mbedtls/hmac.c \ - apps/common/third_party_profile/tuya_protocol/extern_components/mbedtls/md5.c \ - apps/common/third_party_profile/tuya_protocol/extern_components/mbedtls/sha1.c \ - apps/common/third_party_profile/tuya_protocol/extern_components/mbedtls/sha256.c \ - apps/common/third_party_profile/tuya_protocol/port/tuya_ble_port.c \ - apps/common/third_party_profile/tuya_protocol/port/tuya_ble_port_JL.c \ - apps/common/third_party_profile/tuya_protocol/port/tuya_ble_port_peripheral.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_api.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_bulk_data.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_data_handler.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_event.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_event_handler.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_event_handler_weak.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_feature_weather.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_gatt_send_queue.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_heap.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_main.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_mem.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_mutli_tsf_protocol.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_queue.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_storage.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_unix_time.c \ - apps/common/third_party_profile/tuya_protocol/sdk/src/tuya_ble_utils.c \ - apps/common/ui/lcd_simple/lcd_simple_api.c \ - apps/common/ui/lcd_simple/ui.c \ - apps/common/ui/lcd_simple/ui_mainmenu.c \ apps/common/update/testbox_update.c \ apps/common/update/update.c \ apps/common/update/update_tws.c \ apps/common/update/update_tws_new.c \ - apps/earphone/aec/br28/audio_aec.c \ - apps/earphone/aec/br28/audio_aec_demo.c \ - apps/earphone/aec/br28/audio_aec_dms.c \ - apps/earphone/aec/br28/audio_aec_online.c \ - apps/earphone/aec/br28/audio_cvp_3mic.c \ - apps/earphone/aec/br28/audio_cvp_ais_3mic.c \ - apps/earphone/app_ancbox.c \ - apps/earphone/app_anctool.c \ apps/earphone/app_main.c \ - apps/earphone/app_protocol_deal.c \ apps/earphone/app_task_switch.c \ apps/earphone/app_testbox.c \ - apps/earphone/audio_enc_mpt_cvp_ctr.c \ - apps/earphone/audio_enc_mpt_self.c \ apps/earphone/ble_adv.c \ - apps/earphone/board/br28/board_jl7016g_hybrid.c \ - apps/earphone/board/br28/board_jl7018f_demo.c \ - apps/earphone/board/br28/board_jl701n_anc.c \ - apps/earphone/board/br28/board_jl701n_btemitter.c \ apps/earphone/board/br28/board_jl701n_demo.c \ apps/earphone/bt_auto_test.c \ apps/earphone/bt_background.c \ apps/earphone/bt_ble.c \ - apps/earphone/bt_ble_hid.c \ - apps/earphone/bt_emitter.c \ - apps/earphone/bt_tws.c \ apps/earphone/default_event_handler.c \ apps/earphone/dual_update_demo.c \ apps/earphone/earphone.c \ apps/earphone/eartch_event_deal.c \ - apps/earphone/font/fontinit.c \ apps/earphone/idle.c \ apps/earphone/key_event_deal.c \ - apps/earphone/kws_voice_event_deal.c \ - apps/earphone/linein/linein.c \ - apps/earphone/ll_sync_demo/ll_sync_demo.c \ apps/earphone/log_config/app_config.c \ apps/earphone/log_config/lib_btctrler_config.c \ apps/earphone/log_config/lib_btstack_config.c \ @@ -502,53 +384,44 @@ c_SRC_FILES := \ apps/earphone/log_config/lib_media_config.c \ apps/earphone/log_config/lib_system_config.c \ apps/earphone/log_config/lib_update_config.c \ - apps/earphone/music/sd_music.c \ - apps/earphone/pbg_demo.c \ apps/earphone/pc/pc.c \ apps/earphone/power_manage/app_charge.c \ - apps/earphone/power_manage/app_chargestore.c \ apps/earphone/power_manage/app_power_manage.c \ - apps/earphone/power_manage/app_umidigi_chargestore.c \ apps/earphone/rcsp/jl_phone_app.c \ apps/earphone/rcsp/rcsp_adv.c \ apps/earphone/tone_table.c \ - apps/earphone/trans_data_demo/trans_data_demo.c \ - apps/earphone/tuya/tuya_app.c \ - apps/earphone/tuya/tuya_demo.c \ - apps/earphone/ui/lcd_simple/my_demo.c \ apps/earphone/ui_manage.c \ apps/earphone/user_cfg.c \ apps/earphone/version.c \ - apps/earphone/vol_sync.c \ - apps/earphone/wireless_mic/app_main_wireless_mic.c \ - apps/earphone/wireless_mic/audio/adapter_adc.c \ - apps/earphone/wireless_mic/audio/adapter_media.c \ - apps/earphone/wireless_mic/audio/wireless/adapter_wireless_dec.c \ - apps/earphone/wireless_mic/audio/wireless/adapter_wireless_enc.c \ - apps/earphone/wireless_mic/bt/bt_edr_fun.c \ - apps/earphone/wireless_mic/bt/bt_status_event.c \ - apps/earphone/wireless_mic/idev/adapter_idev.c \ - apps/earphone/wireless_mic/idev/idev_bt/adapter_idev_bt.c \ - apps/earphone/wireless_mic/idev/idev_bt/idev_ble/adapter_idev_ble.c \ - apps/earphone/wireless_mic/idev/idev_mic/adapter_idev_mic.c \ - apps/earphone/wireless_mic/odev/adapter_odev.c \ - apps/earphone/wireless_mic/odev/odev_bt/adapter_odev_bt.c \ - apps/earphone/wireless_mic/odev/odev_bt/odev_ble/adapter_odev_ble.c \ - apps/earphone/wireless_mic/odev/odev_bt/odev_ble/odev_ble_wireless.c \ - apps/earphone/wireless_mic/odev/odev_bt/odev_edr/adapter_odev_edr.c \ - apps/earphone/wireless_mic/odev/odev_dac/adapter_odev_dac.c \ - apps/earphone/wireless_mic/process/adapter_process.c \ + apps/usr_jb_proto/Protocol/jb_product.c \ + apps/usr_jb_proto/Protocol/jb_protocol.c \ + apps/usr_jb_proto/Utils/jb_common.c \ + apps/usr_jb_proto/Utils/jb_ringbuffer.c \ + apps/usr_jb_proto/usr_jb_main.c \ + apps/usr_periph/usr_rtc.c \ + apps/usr_periph/bsp_hw.c \ + apps/usr_app/app_led.c \ + apps/usr_app/led.c \ + apps/usr_app/led_manager.c \ + apps/usr_app/key.c \ + apps/usr_app/key_manager.c \ + apps/usr_app/app_mode.c \ + apps/usr_app/app_power.c \ + apps/usr_app/app_pair.c \ + apps/usr_app/app_boot.c \ + apps/usr_app/app_function.c \ + apps/usr_le_code/ble_proto.c \ + apps/usr_le_code/bleproto.c \ + apps/usr_le_code/bleproto_packer.c \ + apps/usr_le_code/thirdpart/mjson/mjson.c \ + apps/usr_le_code/usr_le_adv.c \ + apps/usr_le_code/usr_le_recieve.c \ cpu/br28/adc_api.c \ - cpu/br28/aec_tool.c \ cpu/br28/app_audio.c \ - cpu/br28/audio_anc.c \ - cpu/br28/audio_anc_fade_ctr.c \ - cpu/br28/audio_anc_mult_scene.c \ cpu/br28/audio_capture.c \ cpu/br28/audio_codec_clock.c \ cpu/br28/audio_common/audio_mic_codec.c \ cpu/br28/audio_cvp_dut.c \ - cpu/br28/audio_cvp_sync.c \ cpu/br28/audio_dec.c \ cpu/br28/audio_dec/audio_dec_file.c \ cpu/br28/audio_dec/audio_dec_iis.c \ @@ -556,17 +429,8 @@ c_SRC_FILES := \ cpu/br28/audio_dec/audio_dec_pcm.c \ cpu/br28/audio_dec/audio_usb_mic.c \ cpu/br28/audio_dec_eff.c \ - cpu/br28/audio_demo/audio_adc_demo.c \ - cpu/br28/audio_demo/audio_dac_demo.c \ - cpu/br28/audio_demo/audio_fft_demo.c \ - cpu/br28/audio_demo/audio_matrix_demo.c \ - cpu/br28/audio_demo/audio_wind_detect_demo.c \ - cpu/br28/audio_effect_develop.c \ cpu/br28/audio_enc.c \ cpu/br28/audio_general.c \ - cpu/br28/audio_hearing/audio_hearing_aid.c \ - cpu/br28/audio_hearing/audio_hearing_aid_lp.c \ - cpu/br28/audio_hearing/audio_sidetone.c \ cpu/br28/audio_link.c \ cpu/br28/audio_sync.c \ cpu/br28/charge.c \ @@ -574,7 +438,6 @@ c_SRC_FILES := \ cpu/br28/clock_manager.c \ cpu/br28/eq_config.c \ cpu/br28/hw_fft.c \ - cpu/br28/icsd_anc_user.c \ cpu/br28/iic_hw.c \ cpu/br28/iic_soft.c \ cpu/br28/irflt.c \ @@ -595,50 +458,13 @@ c_SRC_FILES := \ cpu/br28/pwm_led.c \ cpu/br28/rdec.c \ cpu/br28/setup.c \ - cpu/br28/smart_voice/aispeech_asr.c \ - cpu/br28/smart_voice/jl_kws_platform.c \ - cpu/br28/smart_voice/kws_event.c \ - cpu/br28/smart_voice/nn_vad.c \ - cpu/br28/smart_voice/smart_voice_config.c \ - cpu/br28/smart_voice/smart_voice_core.c \ - cpu/br28/smart_voice/user_asr.c \ - cpu/br28/smart_voice/vad_clock_trim.c \ - cpu/br28/smart_voice/vad_mic.c \ - cpu/br28/smart_voice/voice_mic_data.c \ cpu/br28/sound_device.c \ - cpu/br28/spatial_effect/spatial_effect.c \ - cpu/br28/spatial_effect/spatial_effect_imu.c \ - cpu/br28/spatial_effect/spatial_effect_test.c \ - cpu/br28/spatial_effect/spatial_effect_tws.c \ - cpu/br28/spatial_effect/spatial_imu_trim.c \ cpu/br28/spi.c \ cpu/br28/tone_player.c \ cpu/br28/tws_audio.c \ cpu/br28/uart_dev.c \ - cpu/br28/umidigi_chargestore.c \ - apps/usr_jb_proto/Protocol/jb_product.c \ - apps/usr_jb_proto/Protocol/jb_protocol.c \ - apps/usr_jb_proto/Utils/jb_common.c \ - apps/usr_jb_proto/Utils/jb_ringbuffer.c \ - apps/usr_jb_proto/usr_jb_main.c \ - apps/usr_periph/usr_rtc.c \ - apps/usr_periph/bsp_hw.c \ - apps/usr_app/app_led.c \ - apps/usr_app/app_mode.c \ - apps/usr_app/app_power.c \ - apps/usr_app/app_pair.c \ - apps/usr_app/app_boot.c \ - apps/usr_app/app_function.c \ - apps/usr_app/led.c \ - apps/usr_app/led_manager.c \ - apps/usr_app/key.c \ - apps/usr_app/key_manager.c \ - apps/usr_le_code/ble_proto.c \ - apps/usr_le_code/bleproto.c \ - apps/usr_le_code/bleproto_packer.c \ - apps/usr_le_code/thirdpart/mjson/mjson.c \ - apps/usr_le_code/usr_le_adv.c \ - apps/usr_le_code/usr_le_recieve.c \ + cpu/br28/uart_test.c + # 需要编译的 .S 文件 @@ -800,7 +626,7 @@ LINK_AT ?= 1 # 表示下面的不是一个文件的名字，无论是否存在 all, clean, pre_build 这样的文件 # 还是要执行命令 # see: https://www.gnu.org/software/make/manual/html_node/Phony-Targets.html -.PHONY: all clean pre_build +.PHONY: all clean pre_build pack # 不要使用 make 预设置的规则 # see: https://www.gnu.org/software/make/manual/html_node/Suffix-Rules.html @@ -809,7 +635,18 @@ LINK_AT ?= 1 all: pre_build $(OUT_ELF) $(info +POST-BUILD) $(QUITE) $(RUN_POST_SCRIPT) sdk +ifneq ($(PACK_SCRIPT),) + $(info +PACK-FIRMWARE) + $(QUITE) $(PACK_SCRIPT) +endif +pack: + $(info +PACK-FIRMWARE) +ifneq ($(PACK_SCRIPT),) + $(QUITE) $(PACK_SCRIPT) +else + $(error pack script is Windows-only) +endif pre_build: $(info +PRE-BUILD) diff --git a/apps/usr_app/app_mode.c b/apps/usr_app/app_mode.c index 644b627..c4e4b6d 100644 --- a/apps/usr_app/app_mode.c +++ b/apps/usr_app/app_mode.c @@ -38,50 +38,50 @@ typedef struct { /* 节拍以 ms=0 结尾，循环播放。同向连续步进只改占空比，换向才刹车。 */ static const AppModeStep_t s_mode1[] = { /* 弹力呼吸：慢加速放、慢加速收，最长 2s */ - STEP_OUT(600, DUTY_MID), STEP_OUT(2000, DUTY_RUN), STEP_OUT(500, DUTY_PUNCH), + STEP_OUT(500, DUTY_MID), STEP_OUT(1200, DUTY_RUN), STEP_OUT(500, DUTY_PUNCH), STEP_STOP(400), - STEP_IN(600, DUTY_MID), STEP_IN(2000, DUTY_RUN), STEP_IN(500, DUTY_PUNCH), + STEP_IN(500, DUTY_MID), STEP_IN(1200, DUTY_RUN), STEP_IN(500, DUTY_PUNCH), STEP_STOP(400), STEP_END }; static const AppModeStep_t s_mode2[] = { /* 飞鸟俯冲：快冲出去，2s 慢慢收回 */ - STEP_OUT(150, DUTY_PUNCH), STEP_OUT(250, DUTY_RUN), - STEP_STOP(150), - STEP_IN(2000, DUTY_SOFT), STEP_IN(800, DUTY_MID), + STEP_OUT(500, DUTY_PUNCH), STEP_OUT(500, DUTY_RUN), + STEP_STOP(400), + STEP_IN(2800, DUTY_MID), STEP_STOP(400), STEP_END }; static const AppModeStep_t s_mode3[] = { /* 云阶陀螺：短步往返加长，力度一档档加 */ - STEP_OUT(220, DUTY_SOFT), STEP_IN(220, DUTY_SOFT), - STEP_OUT(220, DUTY_MID), STEP_IN(220, DUTY_MID), - STEP_OUT(220, DUTY_RUN), STEP_IN(220, DUTY_RUN), + STEP_OUT(800, DUTY_SOFT), STEP_IN(800, DUTY_SOFT), + STEP_OUT(800, DUTY_MID), STEP_IN(800, DUTY_MID), + STEP_OUT(800, DUTY_RUN), STEP_IN(800, DUTY_RUN), STEP_STOP(400), STEP_END }; static const AppModeStep_t s_mode4[] = { /* 起伏攻防：2s 慢逗再猛收 */ - STEP_OUT(500, DUTY_SOFT), STEP_OUT(2000, DUTY_MID), STEP_OUT(400, DUTY_RUN), - STEP_STOP(250), - STEP_IN(180, DUTY_PUNCH), STEP_IN(400, DUTY_MID), - STEP_STOP(500), + STEP_OUT(500, DUTY_SOFT), STEP_OUT(1200, DUTY_MID), STEP_OUT(500, DUTY_RUN), + STEP_STOP(400), + STEP_IN(500, DUTY_PUNCH), STEP_IN(500, DUTY_MID), + STEP_STOP(400), STEP_END }; static const AppModeStep_t s_mode5[] = { /* 微风拂动：轻点后歇 2s */ - STEP_OUT(200, DUTY_MID), STEP_STOP(2000), - STEP_IN(200, DUTY_MID), STEP_STOP(2000), - STEP_OUT(400, DUTY_RUN), STEP_STOP(800), - STEP_IN(400, DUTY_RUN), STEP_STOP(1500), + STEP_OUT(500, DUTY_MID), STEP_STOP(1000), + STEP_IN(500, DUTY_MID), STEP_STOP(1200), + STEP_OUT(500, DUTY_RUN), STEP_STOP(800), + STEP_IN(500, DUTY_RUN), STEP_STOP(1500), STEP_END }; static const AppModeStep_t s_mode6[] = { /* 闪电快闪：两下轻、两下重，短停防 LVD */ - STEP_OUT(200, DUTY_MID), STEP_IN(200, DUTY_MID), - STEP_OUT(400, DUTY_RUN), STEP_IN(400, DUTY_RUN), - STEP_OUT(100, DUTY_PUNCH), STEP_IN(100, DUTY_PUNCH), - STEP_OUT(100, DUTY_PUNCH), STEP_IN(100, DUTY_PUNCH), + STEP_OUT(400, DUTY_MID), STEP_IN(400, DUTY_MID), + STEP_OUT(800, DUTY_RUN), STEP_IN(800, DUTY_RUN), + STEP_OUT(500, DUTY_PUNCH), STEP_IN(500, DUTY_PUNCH), + STEP_OUT(700, DUTY_PUNCH), STEP_IN(700, DUTY_PUNCH), STEP_STOP(300), STEP_END }; diff --git a/apps/usr_app/app_pair.c b/apps/usr_app/app_pair.c index 9c2463e..9ba084b 100644 --- a/apps/usr_app/app_pair.c +++ b/apps/usr_app/app_pair.c @@ -58,7 +58,7 @@ AppPairEvt_t app_pair_tick_1ms(uint16_t dt) if (s_pair.elapsed_ms >= BOARD_PAIR_TIMEOUT_MS) { s_pair.active = 0; s_pair.elapsed_ms = 0; - log_info("pair timeout 60s, stay on\n"); + log_info("pair timeout 120s, stay on\n"); return APP_PAIR_EVT_FAIL; } diff --git a/apps/usr_periph/board_pin.h b/apps/usr_periph/board_pin.h index d5f6fcc..d08d533 100644 --- a/apps/usr_periph/board_pin.h +++ b/apps/usr_periph/board_pin.h @@ -68,7 +68,7 @@ #define BOARD_KEY_POWER_MS 3000 /**< 深睡：按住 3s 开机；开机中：按住 3s 深睡 */ #define BOARD_KEY_PAIR_MS 5000 /**< 深睡：按住 5s 开机并进配对（开机中继续按不住配对） */ #define BOARD_KEY_DEBOUNCE_MS 20 /**< 按键消抖 */ -#define BOARD_PAIR_TIMEOUT_MS (60u * 1000u) /**< 配对超时，失败后保持开机 */ +#define BOARD_PAIR_TIMEOUT_MS (120u * 1000u) /**< 配对超时 120s，失败后保持开机 */ #define BOARD_LED_FAST_ON_MS 100 /**< 配对绿快闪：亮 */ #define BOARD_LED_FAST_OFF_MS 100 /**< 配对绿快闪：灭 */ diff --git a/build.bat b/build.bat new file mode 100644 index 0000000..6b3a015 --- /dev/null +++ b/build.bat @@ -0,0 +1,30 @@ +@echo off +chcp 65001 >nul +cd /d "%~dp0" +setlocal EnableDelayedExpansion + +REM JieLi make / mkdir_win / rm / fixbat live in tools\utils, not in system PATH +set "PATH=%~dp0tools\utils;%PATH%" + +REM USB burn: default nokey. build.bat key / build.bat nokey +set "JL_BURN_KEY=0" +set "MAKE_ARGS=" + +for %%A in (%*) do ( + if /i "%%~A"=="key" ( + set "JL_BURN_KEY=1" + ) else if /i "%%~A"=="nokey" ( + set "JL_BURN_KEY=0" + ) else ( + set "MAKE_ARGS=!MAKE_ARGS! %%~A" + ) +) + +if "!JL_BURN_KEY!"=="1" ( + echo [build] USB burn: WITH key +) else ( + echo [build] USB burn: NO key +) + +make !MAKE_ARGS! +exit /b !errorlevel! \ No newline at end of file diff --git a/cpu/br28/tools/download/earphone/download_app_ota.bat b/cpu/br28/tools/download/earphone/download_app_ota.bat index bdeea66..41fa64f 100644 --- a/cpu/br28/tools/download/earphone/download_app_ota.bat +++ b/cpu/br28/tools/download/earphone/download_app_ota.bat @@ -10,10 +10,57 @@ copy ..\..\ota.bin . copy ..\..\anc_coeff.bin . copy ..\..\anc_gains.bin . -..\..\isd_download.exe ..\..\isd_config.ini -tonorflash -dev br28 -boot 0x120000 -div8 -wait 300 -uboot ..\..\uboot.boot -app ..\..\app.bin -res ..\..\cfg_tool.bin tone.cfg p11_code.bin -uboot_compress -key RS-5B88.key +set "ISD_CMD=..\..\isd_download.exe ..\..\isd_config.ini -dev br28 -boot 0x120000 -div8 -wait 300 -uboot ..\..\uboot.boot -app ..\..\app.bin -res ..\..\cfg_tool.bin tone.cfg p11_code.bin -uboot_compress" -:: -format all -::-reboot 2500 +REM JL_BURN_KEY=1/key : USB flash keyed image; still generate nokey files +REM default / 0 / nokey : USB flash nokey image; still generate keyed files +set "NOKEY_FLASH=" +set "KEY_FLASH=" +if /i "%JL_BURN_KEY%"=="1" goto :usb_key +if /i "%JL_BURN_KEY%"=="key" goto :usb_key +if /i "%JL_BURN_KEY%"=="yes" goto :usb_key +set "NOKEY_FLASH=-tonorflash" +echo [download] USB burn: NO key +goto :do_isd + +:usb_key +set "KEY_FLASH=-tonorflash" +echo [download] USB burn: WITH key + +:do_isd +REM ---- nokey image ---- +%ISD_CMD% %NOKEY_FLASH% +if exist jl_isd.fw copy /y jl_isd.fw jl_isd_nokey.fw >nul +..\..\ufw_maker.exe -fw_to_ufw jl_isd.fw +if exist jl_isd.ufw ( + copy /y jl_isd.ufw update.ufw >nul + copy /y jl_isd.ufw update_nokey.ufw >nul + del jl_isd.ufw +) +if exist db_update_data.bin copy /y db_update_data.bin db_update_data_nokey.bin >nul + +REM ---- keyed image ---- +if exist RS-5B88.key ( + %ISD_CMD% %KEY_FLASH% -key RS-5B88.key + REM isd_download returns -11 when USB is offline; image is still generated + if exist jl_isd.fw copy /y jl_isd.fw jl_isd_key.fw >nul + ..\..\ufw_maker.exe -fw_to_ufw jl_isd.fw + if exist jl_isd.ufw ( + copy /y jl_isd.ufw update_key.ufw >nul + del jl_isd.ufw + ) + if exist db_update_data.bin copy /y db_update_data.bin db_update_data_key.bin >nul +) else ( + if /i not "%KEY_FLASH%"=="" ( + echo [download] ERROR: RS-5B88.key not found, cannot USB-burn keyed image + exit /b 1 + ) +) + +REM keep default names as nokey for tools that still look for jl_isd.fw +if exist jl_isd_nokey.fw copy /y jl_isd_nokey.fw jl_isd.fw >nul +if exist update_nokey.ufw copy /y update_nokey.ufw update.ufw >nul +if exist db_update_data_nokey.bin copy /y db_update_data_nokey.bin db_update_data.bin >nul @rem delete temp files if exist *.mp3 del *.mp3 @@ -22,15 +69,6 @@ if exist *.TAB del *.TAB if exist *.res del *.res if exist *.sty del *.sty -..\..\ufw_maker.exe -fw_to_ufw jl_isd.fw -copy jl_isd.ufw update.ufw -del jl_isd.ufw - -@rem generate config ufw (disabled) -::ufw_maker.exe -chip AC800X %ADD_KEY% -output config.ufw -res bt_cfg.cfg - -::IF EXIST jl_696x.bin del jl_696x.bin - if exist script.ver del script.ver if exist tone.cfg del tone.cfg if exist p11_code.bin del p11_code.bin @@ -39,9 +77,9 @@ if exist anc_coeff.bin del anc_coeff.bin if exist anc_gains.bin del anc_gains.bin @rem common isd_download flags -@rem -format vm -@rem -format cfg -@rem -format 0x3f0-2 +@rem -format vm erase VM area +@rem -format cfg erase BT CFG area +@rem -format 0x3f0-2 erase 2 sectors from 0x3f0 (1st arg hex/dec, 2nd must be decimal) ping /n 2 127.1>null -IF EXIST null del null \ No newline at end of file +IF EXIST null del null diff --git a/docs/门夹弹力绳_需求文档.md b/docs/门夹弹力绳_需求文档.md new file mode 100644 index 0000000..6b8a4e0 --- /dev/null +++ b/docs/门夹弹力绳_需求文档.md @@ -0,0 +1,131 @@ +# 门夹弹力绳 需求文档（V1.1） + +| 项目 | 内容 | +| --- | --- | +| 产品名称 | 门夹弹力绳（智能逗宠玩具） | +| 型号 | PICBC2 / CBC2 | +| 主控 | 杰理 AC7016C | +| 日期 | 2026-08-25 | + +--- + +## 1. 产品简介 + +门夹弹力绳是一款智能逗宠玩具。设备夹在门板上，内部电机带动弹力绳收放，让绳端玩具按不同"玩法"动起来逗宠物玩。支持手机 App 通过远程控制，也支持按键本地操作。 + +--- + +## 2. 核心功能 + +### 2.1 开关机 + +| 操作 | 行为 | +| --- | --- | +| 深睡状态下按 3 秒 | 开机 | +| 深睡状态下按 5 秒 | 开机并进入配对模式 | +| 开机状态下按 3 秒 | 关机（深睡省电） | +| 插着充电线时上电 | 自动开机，不用按键 | +| 刚上电没按按键 | 保持深睡，不误开机 | + +- 深睡状态下，按按键（3 秒/5 秒）或插充电线均可唤醒开机。 + +### 2.2 开关（App 控制） + +- App 可开/关设备功能；关闭后电机停转，蓝牙不断开，可随时再开。 +- 拔掉充电线会自动进入低功耗状态（电机停转、LED 关闭、蓝牙保持连接）。 + +### 2.3 自动玩法（6 种，App 或按键选择） + +| 玩法 | 效果 | +| --- | --- | +| 停止复位 | 停转 | +| 弹力伪装 | 绳子慢慢放出去再慢慢收回来，来回一次 | +| 飞鸟俯冲 | 快速冲出去，再慢慢收回，模拟小鸟飞扑 | +| 云阶小陀螺 | 小幅度来回抖动，力度逐渐加大，像陀螺转动 | +| 起伏攻防战 | 慢慢逗弄两秒，突然猛收一下 | +| 微风拂动 | 轻轻动一下，歇两秒，像被风吹动 | +| 闪电快闪 | 快速连续来回抽动，动作急促 | + +- 玩法会循环播放，直到切换或停止。 +- 运行中可随时切换到其他玩法或停止。 + +### 2.4 手动控制（App 控制） + +- App 可手动点动：控制电机**收绳**或**放绳**，松手/点停止后电机停止。 +- 手动控制进行中，自动玩法暂停。 + +### 2.5 按键控制 + +| 操作 | 行为 | +| --- | --- | +| 短按（<1 秒） | 切换玩法：停 → 玩法1 → 玩法2 → … → 玩法6 → 停，循环 | +| 长按 3 秒 | 关机 | +| 充电中 / 配对中 | 按键无效 | + +### 2.6 电量与充电 + +- 电量按电压换算：满电 4.2V = 100%，3.2V = 0%，电量自动上报 App 显示。 +- **低电量**（电池电压低于 **3.7V**）：App 上报警告，指示灯红灯慢闪；持续 1 分钟未充电则自动关机保护电池。 +- **电量极低**（低于 3.2V）：直接自动关机。 +- **插入充电线**：电机立即停止、进入充电状态，只有红灯常亮，表示充电中，充满转绿灯常亮；充电期间不执行玩法，按键无效。 +- **充电中拔掉充电线**：设备自动进入低功耗状态（电机停转、LED关闭、蓝牙保持连接），需按短按按键或 App 重新开启后才能使用。 +- 电池：锂电池，USB 5V 充电，充满自动转灯。 + +### 2.7 指示灯 + +| 状态 | 灯效 | +| --- | --- | +| 正常待机 | 绿灯常亮 | +| 充电中 | 红灯常亮 | +| 充满 | 绿灯常亮 | +| 低电量 | 红灯慢闪 | +| 配对中 | 绿灯快闪 | +| 配对成功 | 绿灯常亮 3 秒 | +| 配对失败 | 红绿交替闪 3 秒 | +| 按键切玩法 | 绿灯闪两下 | + +### 2.8 配对 + +- 首次使用：深睡状态长按 5 秒开机并进入配对，App 扫码连接即可。 +- 配对窗口 120 秒：期间连接成功绿灯 3 秒；超时未连接保持开机，可重新配对。 +- App 可解绑设备，解绑后设备清除配对信息，重新配对即可再次使用。 + +### 2.9 时间同步 + +- 设备带实时时钟，连接后自动与手机对时（时区跟随手机）。 + +### 2.10 固件升级（OTA） + +- 支持 App 远程升级固件，升级协议已打通。 +- 当前版本：固件 V1.0.0、硬件 V1.0.0。 +- 实际升级流程（写入芯片、校验、版本判断）待开发。 + +--- + +## 3. 性能要求（功耗） + +| 状态 | 要求 | +| --- | --- | +| 关机（深睡） | ≤ 8 uA | +| 待机（空闲，未接充电） | ≤ 300 uA | +| 待机 + 指示灯常亮 | ≤ 600 uA | + +--- + +## 4. 待完善功能（当前仅预留，未实现） + +| 功能 | 说明 | +| --- | --- | +| 绳索校准 | App 下发校准命令，用于校准绳子位置 | +| 绳索圈数设置 | App 设置圈数，用于限制收绳行程 | +| 勿扰模式 | App 开关，控制设备在某些时段不动作 | +| 手动力度/百分比 | 手动控制时调节收放力度，预留 | +| OTA 实际升级 | 协议已就绪，芯片写入逻辑待开发 | + +--- + +## 5. 使用注意 + +- 设备空闲时自动进入低功耗省电模式，有操作时自动唤醒。 +- 电机换向、停止均做过安全处理，避免损坏电机和电池。 +- 换硬件板子时，只需改引脚配置文件，业务逻辑不变。 diff --git a/tools/pack_firmware.bat b/tools/pack_firmware.bat new file mode 100644 index 0000000..957c19b --- /dev/null +++ b/tools/pack_firmware.bat @@ -0,0 +1,12 @@ +@echo off +chcp 65001 >nul +cd /d "%~dp0" +powershell -NoProfile -ExecutionPolicy Bypass -File "%~dp0pack_firmware.ps1" +if errorlevel 1 ( + echo. + echo pack failed. + pause + exit /b 1 +) +echo. +pause \ No newline at end of file diff --git a/tools/pack_firmware.ps1 b/tools/pack_firmware.ps1 new file mode 100644 index 0000000..9800d07 --- /dev/null +++ b/tools/pack_firmware.ps1 @@ -0,0 +1,168 @@ +# pack_firmware.ps1 +# Extract JieLi burn files and zip as Project_Version_Date. +# ASCII only: Windows PowerShell 5.1 mis-parses UTF-8 without BOM. +# +# Usage: +# .\build.bat - build + download.bat + pack +# make pack - pack only +# tools\pack_firmware.bat + +[CmdletBinding()] +param( + [string]$ProjectName = "PICBC2", + [string]$SdkRoot = "" +) + +$ErrorActionPreference = "Stop" +$exitCode = 0 + +try { + +if ([string]::IsNullOrWhiteSpace($SdkRoot)) { + $SdkRoot = Split-Path -Parent $PSScriptRoot +} + +$VersionHeader = Join-Path $SdkRoot "apps\usr_jb_proto\Protocol\jb_product.h" +$DownloadDir = Join-Path $SdkRoot "cpu\br28\tools\download\earphone" +$ReleaseRoot = Join-Path $SdkRoot "release" + +function Read-FwVersion { + param([string]$HeaderPath) + + if (-not (Test-Path -LiteralPath $HeaderPath)) { + throw "version header not found: $HeaderPath" + } + + $text = Get-Content -LiteralPath $HeaderPath -Raw -Encoding UTF8 + $major = $null + $minor = $null + $patch = $null + + if ($text -match '(?m)^\s*#define\s+JB_MCU_SW_VERSION_MAJOR\s+(\d+)') { + $major = $Matches[1] + } + if ($text -match '(?m)^\s*#define\s+JB_MCU_SW_VERSION_MINOR\s+(\d+)') { + $minor = $Matches[1] + } + if ($text -match '(?m)^\s*#define\s+JB_MCU_SW_VERSION_PATCH\s+(\d+)') { + $patch = $Matches[1] + } + + if (($null -eq $major) -or ($null -eq $minor) -or ($null -eq $patch)) { + throw "cannot parse JB_MCU_SW_VERSION_* from $HeaderPath" + } + + return "V$major.$minor.$patch" +} + +$PackItems = @( + @{ Name = "jl_isd_nokey.fw"; Fallback = "jl_isd.fw"; Suffix = "_nokey_burner.fw"; Required = $true; NoteKey = "burner_nokey" }, + @{ Name = "update_nokey.ufw"; Fallback = "update.ufw"; Suffix = "_nokey_app_ota.ufw"; Required = $false; NoteKey = "app_nokey" }, + @{ Name = "db_update_data_nokey.bin"; Fallback = "db_update_data.bin"; Suffix = "_nokey_gateway_ota.bin"; Required = $false; NoteKey = "gw_nokey" }, + @{ Name = "jl_isd_key.fw"; Fallback = ""; Suffix = "_key_burner.fw"; Required = $false; NoteKey = "burner_key" }, + @{ Name = "update_key.ufw"; Fallback = ""; Suffix = "_key_app_ota.ufw"; Required = $false; NoteKey = "app_key" }, + @{ Name = "db_update_data_key.bin"; Fallback = ""; Suffix = "_key_gateway_ota.bin"; Required = $false; NoteKey = "gw_key" } +) + +$NoteZh = @{} +$notesFile = Join-Path $PSScriptRoot "pack_notes_zh.txt" +Get-Content -LiteralPath $notesFile -Encoding UTF8 | ForEach-Object { + if ($_ -match '^([^|]+)\|(.*)$') { + $NoteZh[$Matches[1].Trim()] = $Matches[2].Trim() + } +} + +Write-Host "========================================" +Write-Host " pack firmware" +Write-Host "========================================" + +$version = Read-FwVersion -HeaderPath $VersionHeader +$dateStr = Get-Date -Format "yyMMddHHmm" +$pkgName = "${ProjectName}_${version}_${dateStr}" + +Write-Host "project : $ProjectName" +Write-Host "version : $version (from jb_product.h)" +Write-Host "date : $dateStr" +Write-Host "source : $DownloadDir" +Write-Host "" + +if (-not (Test-Path -LiteralPath $DownloadDir)) { + throw "download dir not found, compile the project first: $DownloadDir" +} + +$copied = @() +foreach ($item in $PackItems) { + $src = Join-Path $DownloadDir $item.Name + if (-not (Test-Path -LiteralPath $src) -and $item.Fallback) { + $src = Join-Path $DownloadDir $item.Fallback + } + if (Test-Path -LiteralPath $src) { + $item.Src = $src + $item.Dest = $pkgName + $item.Suffix + $copied += $item + continue + } + if ($item.Required) { + throw "missing required file: $($item.Name); please build the firmware first." + } + Write-Host "[skip] $($item.Name) not generated" +} + +if ($copied.Count -eq 0) { + throw "no firmware files found in $DownloadDir" +} + +$pkgDir = Join-Path $ReleaseRoot $pkgName +if (Test-Path -LiteralPath $pkgDir) { + Remove-Item -LiteralPath $pkgDir -Recurse -Force +} +New-Item -ItemType Directory -Path $pkgDir -Force | Out-Null + +foreach ($item in $copied) { + Copy-Item -LiteralPath $item.Src -Destination (Join-Path $pkgDir $item.Dest) -Force + $size = (Get-Item -LiteralPath $item.Src).Length + Write-Host ("[copy] {0,-28} -> {1} ({2} bytes)" -f (Split-Path $item.Src -Leaf), $item.Dest, $size) +} + +$fileList = New-Object System.Collections.Generic.List[string] +foreach ($item in $copied) { + $note = $NoteZh[$item.NoteKey] + [void]$fileList.Add((" {0}" -f $item.Dest)) + [void]$fileList.Add((" {0}" -f $note)) +} + +$tplPath = Join-Path $PSScriptRoot "pack_readme_zh.txt" +$readme = Get-Content -LiteralPath $tplPath -Raw -Encoding UTF8 +$readme = $readme.Replace("{{PKG_NAME}}", $pkgName) +$readme = $readme.Replace("{{PROJECT}}", $ProjectName) +$readme = $readme.Replace("{{VERSION}}", $version) +$readme = $readme.Replace("{{DATE}}", (Get-Date -Format "yyyy-MM-dd HH:mm:ss")) +$readme = $readme.Replace("{{FILE_LIST}}", ($fileList -join "`r`n")) +$readme = $readme -replace "`n", "`r`n" +$readme = $readme -replace "`r`r`n", "`r`n" +[System.IO.File]::WriteAllText( + (Join-Path $pkgDir "README.txt"), + $readme, + [System.Text.UTF8Encoding]::new($true) +) + +$zipPath = Join-Path $ReleaseRoot "$pkgName.zip" +if (Test-Path -LiteralPath $zipPath) { + Remove-Item -LiteralPath $zipPath -Force +} + +Compress-Archive -Path (Join-Path $pkgDir "*") -DestinationPath $zipPath -CompressionLevel Optimal + +Write-Host "" +Write-Host "folder : $pkgDir" +Write-Host "zip : $zipPath" +Write-Host "done." +Write-Host "========================================" + +} catch { + Write-Host "" + Write-Host "pack failed: $($_.Exception.Message)" + $exitCode = 1 +} + +exit $exitCode diff --git a/tools/pack_notes_zh.txt b/tools/pack_notes_zh.txt new file mode 100644 index 0000000..605f28a --- /dev/null +++ b/tools/pack_notes_zh.txt @@ -0,0 +1,6 @@ +burner_nokey|不带 Key：产线批量烧录器镜像（调试、未加密芯片） +app_nokey|不带 Key：手机 APP / 小程序 OTA（UFW） +gw_nokey|不带 Key：55AA 服务器 OTA / 网关 OTA（杰理双备份包） +burner_key|带 Key：产线批量烧录器镜像（烧录器需配置同一把 key） +app_key|带 Key：手机 APP / 小程序 OTA（UFW） +gw_key|带 Key：55AA 服务器 OTA / 网关 OTA（杰理双备份包） diff --git a/tools/pack_readme_zh.txt b/tools/pack_readme_zh.txt new file mode 100644 index 0000000..6181b79 --- /dev/null +++ b/tools/pack_readme_zh.txt @@ -0,0 +1,20 @@ +包名 : {{PKG_NAME}} +项目 : {{PROJECT}} +版本 : {{VERSION}} +日期 : {{DATE}} + +文件说明： +{{FILE_LIST}} + +使用说明： +1. 批量烧录器：打开 *_burner.fw。 +2. 杰理 UFW 通道（部分 APP / 小程序）：上传 *_app_ota.ufw。 +3. 走本协议 55AA 的服务器 OTA（APP / 小程序 / 网关都一样）：上传 *_gateway_ota.bin。 + Type=0x02（BLE），不要传 ufw / fw / 普通 app.bin。 +4. 杰理网关若单独吃双备份包：同样用 *_gateway_ota.bin。 + +不带 Key（*_nokey_*）：调试、未加密芯片。 +带 Key（*_key_*）：加密镜像，烧录器 / 升级工具必须配置同一把 key（RS-5B88）。 + +本包不包含 .key 文件，请不要把工厂 key 发给终端用户。 +本机 USB：.\build.bat 默认烧 nokey；.\build.bat key 烧带 Key。两套文件都会打包。