魔盒最新版本，更新了充电检测，鸟叫，dp4对声音的控制，声音模块由于硬件问题暂未实测

AC701N.cbp

@@ -833,6 +833,15 @@
 			<Option compilerVar="CC" />
 		</Unit>
 		<Unit filename="apps/usr_app/app_function.h" />
+		<Unit filename="apps/usr_app/app_audio_debug.h" />
+		<Unit filename="apps/usr_app/car_audio_test.c">
+            <Option compilerVar="CC" />
+        </Unit>
+        <Unit filename="apps/usr_app/car_audio_test.h" />
+		<Unit filename="apps/usr_app/app_no_disturb.c">
+			<Option compilerVar="CC" />
+		</Unit>
+		<Unit filename="apps/usr_app/app_no_disturb.h" />
 		<Unit filename="apps/usr_app/app_shake_wake.c">
 			<Option compilerVar="CC" />
 		</Unit>

Makefile

@@ -412,6 +412,7 @@ c_SRC_FILES := \
 	apps/usr_app/app_boot.c \
 	apps/usr_app/app_function.c \
 	apps/usr_app/app_no_disturb.c \
+	apps/usr_app/car_audio_test.c \
 	apps/usr_app/app_shake_wake.c \
 	apps/usr_le_code/ble_proto.c \
 	apps/usr_le_code/bleproto.c \

apps/common/device/key/key_driver.c

@@ -236,9 +236,9 @@ _notify:
     }
     if (key_event_remap(&e)) {
         sys_event_notify(&e);
-#if TCFG_KEY_TONE_EN
-        audio_key_tone_play();
-#endif
+// #if TCFG_KEY_TONE_EN
+//         audio_key_tone_play();
+// #endif
     }
 _scan_end:
     scan_para->last_key = cur_key_value;

apps/earphone/board/br28/board_jl701n_demo.c

@@ -735,8 +735,7 @@ struct port_wakeup port0 = {
 };
 
 #if BOARD_CHG_ENABLE
-/* R18 is not fitted on CBC4, so VBUS never reaches VPWR in softoff.  Wake on
- * the fitted ME4054 CHG_ON signal instead; it falls when charging starts. */
+/* TP4056 CHRG falls when charging starts; use it for softoff charge wake. */
 struct port_wakeup board_chg_wakeup_port = {
     .pullup_down_enable = ENABLE,
     .edge               = FALLING_EDGE,
@@ -1001,8 +1000,9 @@ void board_set_soft_poweroff(void)
     soff_gpio_protect(TCFG_IOKEY_POWER_ONE_PORT);
 #endif
 #if BOARD_CHG_ENABLE
-    /* Preserve PG8 input state and its external pull-up for softoff wake. */
+    /* Preserve both TP4056 open-drain inputs and their pull-ups in softoff. */
     soff_gpio_protect(BOARD_CHG_PIN);
+    soff_gpio_protect(BOARD_STDBY_PIN);
 #endif
 
 #if (!(TCFG_LP_TOUCH_KEY_ENABLE && TCFG_LP_TOUCH_KEY1_EN))

apps/usr_app/app_audio_debug.h

@@ -0,0 +1,14 @@
+#ifndef APP_AUDIO_DEBUG_H
+#define APP_AUDIO_DEBUG_H
+
+#include "app_config.h"
+#include "system/includes.h"
+
+/* UTF-8 中文日志；只在状态变化时打印，不在音频采样循环内连续打印。 */
+#if TCFG_MAGIC_AUDIO_DEBUG_ENABLE
+#define MAGIC_AUDIO_LOG(fmt, ...) printf("[魔盒声音] " fmt "\n", ##__VA_ARGS__)
+#else
+#define MAGIC_AUDIO_LOG(...) do { } while (0)
+#endif
+
+#endif /* APP_AUDIO_DEBUG_H */

apps/usr_app/app_boot.c

@@ -127,8 +127,10 @@ static uint8_t boot_skip_key_wait(void)
 
     /* USB 在位（充电口有电）：说明是插着电源，不是用户凭空按键开机 */
     for (i = 0; i < 10; i++) {
-        if (bsp_chg_is_low() || bsp_vpwr_is_online()
-            || get_ldo5v_online_hw()) {
+        /* VPWR/LDO5V are the authoritative external-power indicators.
+         * CHRG is open-drain and is only meaningful after VPWR is present;
+         * do not let an abnormal low PG8 skip the key wait by itself. */
+        if (get_ldo5v_online_hw()) {
             log_info("boot usb, skip key wait\n");
             return 1;
         }

apps/usr_app/app_function.c

@@ -20,6 +20,8 @@
 #include "app_led.h"
 #include "app_shake_wake.h"
 #include "app_no_disturb.h"
+#include "car_audio_test.h"
+#include "app_audio_debug.h"
 #include "app_time_util.h"
 #include "bsp_hw.h"
 #include "board_pin.h"
@@ -254,6 +256,10 @@ static void function_play_mode_apply(uint8_t mode)
 {
     uint8_t old_mode = s_func.play_mode;
 
+    MAGIC_AUDIO_LOG("模式切换请求：旧=%u，请求=%u，DP4=%u，功能开关=%u，充电=%u，关机中=%u，OTA=%u",
+                    old_mode, mode, gDevData.beep_trig, s_func.app_power,
+                    app_power_usb_online(), app_power_poweroff_pending(), app_led_is_ota());
+
     if (mode > PLAY_MODE_5) {
         mode = 0;
     }
@@ -273,10 +279,17 @@ static void function_play_mode_apply(uint8_t mode)
     } else {
         app_mode_start(mode);
     }
+    // MAGIC_AUDIO_LOG("模式切换结果：旧=%u，实际=%u；当前测试不拦截DP4", old_mode, mode);
     if (mode != old_mode) {
     app_led_request_mode_blink(); /* 模式真变了才闪两下 */
+
+    /* DP4：0=关闭模式切换鸟叫，1=允许播放 */
+    //&& gDevData.beep_trig
+    if ((mode != PLAY_MODE_0) && gDevData.beep_trig) {
+            Car_Audio_Test_Play();
     }
 }
+}
 
 /**
  * @brief  跟随 APP 下发的 DP1 自动模式
@@ -373,7 +386,7 @@ static void function_hand_poll(void)
         s_func.play_mode = 0;
         s_func.play_ms = 0;
         gDevData.play_mode = 0;
-        app_mode_stop(); /* 自动切手动：先停自动玩法 */
+        app_mode_stop(); 
         s_func.hand_busy = 1;
         s_func.hand_ms = 0;
         gDevData.hand_mode = cmd;
@@ -384,10 +397,10 @@ static void function_hand_poll(void)
             bsp_drive_set(BSP_MOTOR_STOP, 0,
                           BSP_MOTOR_FORWARD, 5500);
         }
-        app_led_request_mode_blink(); /* 自动/空闲切到手动，闪两下提示 */
-        log_info("hand cmd=%d %s max=%ums\n", cmd,
-                 (cmd == HAND_MODE_1) ? "upper" : "lower",
-                 (unsigned)BOARD_HAND_PULSE_MS);
+        app_led_request_mode_blink(); 
+        if (gDevData.beep_trig) {
+            Car_Audio_Test_Play();    
+        }
     } else {
         gDevData.hand_mode = HAND_MODE_0;
         if (s_func.hand_busy) {

apps/usr_app/app_function.h

@@ -39,7 +39,6 @@ void app_function_dp_hand_write(uint8_t cmd);
 /** CBC4 DP6 震动开机开关。 */
 void app_function_set_shake_wake(uint8_t enable);
 
-
 /**
  * @brief  跟随 APP 下发的 DP0/DP1，并处理 DP2 手动点动，每个业务 tick 调用一次
  * @return 无

apps/usr_app/app_no_disturb.c

@@ -1,10 +1,17 @@
 #include "app_no_disturb.h"
-#include "usr_rtc.h"
 #include "system/includes.h"
+#include "usr_rtc.h"
 
+#define APP_NO_DISTURB_VM_ID       28U
+#define APP_NO_DISTURB_MAGIC        0x4e44U
+#define APP_NO_DISTURB_VERSION      1U
 #define APP_MINUTES_PER_DAY         (24U * 60U)
-#define APP_NO_DISTURB_VM_MAGIC    0x444e4431UL
-#define APP_NO_DISTURB_VM_VERSION  1U
+
+typedef struct __attribute__((packed)) {
+    uint16_t magic;
+    uint8_t version;
+    uint8_t cfg[APP_NO_DISTURB_CFG_LEN];
+} AppNoDisturbVm_t;
 
 typedef struct {
     uint8_t enabled;
@@ -13,36 +20,65 @@ typedef struct {
     uint16_t end_minute;
 } AppNoDisturbCtx_t;
 
-typedef struct {
-    uint32_t magic;
-    uint8_t version;
-    uint8_t length;
-    uint16_t checksum;
-    uint8_t data[APP_NO_DISTURB_DATA_LEN];
-} AppNoDisturbVm_t;
-
 static AppNoDisturbCtx_t s_no_disturb;
-static uint8_t s_saved_data[APP_NO_DISTURB_DATA_LEN];
-static uint8_t s_saved_valid;
 
-static uint16_t app_no_disturb_checksum(const uint8_t *data)
+static uint8_t app_no_disturb_cfg_valid(const uint8_t cfg[APP_NO_DISTURB_CFG_LEN])
 {
-    uint16_t checksum = 0xa55aU;
     uint8_t i;
 
-    for (i = 0; i < APP_NO_DISTURB_DATA_LEN; i++) {
-        checksum = (uint16_t)((checksum << 5) | (checksum >> 11));
-        checksum ^= data[i];
+    if (!cfg || cfg[0] > 1U || cfg[9] >= 24U || cfg[11] >= 24U ||
+        cfg[10] >= 60U || cfg[12] >= 60U) {
+        return 0;
     }
-    return checksum;
+    for (i = 0; i < 7U; i++) {
+        if (cfg[2U + i] > 1U) {
+            return 0;
+        }
+    }
+    return 1;
 }
 
-static uint8_t app_no_disturb_vm_valid(const AppNoDisturbVm_t *vm)
+void app_no_disturb_configure(uint8_t enable, uint8_t weekdays_mask,
+                              uint16_t start_minute, uint16_t end_minute)
 {
-    return vm->magic == APP_NO_DISTURB_VM_MAGIC &&
-           vm->version == APP_NO_DISTURB_VM_VERSION &&
-           vm->length == APP_NO_DISTURB_DATA_LEN &&
-           vm->checksum == app_no_disturb_checksum(vm->data);
+    s_no_disturb.enabled = !!enable;
+    s_no_disturb.weekdays_mask = weekdays_mask & 0x7fU;
+    s_no_disturb.start_minute = start_minute;
+    s_no_disturb.end_minute = end_minute;
+}
+
+uint8_t app_no_disturb_storage_load(uint8_t cfg[APP_NO_DISTURB_CFG_LEN])
+{
+    AppNoDisturbVm_t vm;
+    int ret;
+
+    if (!cfg) {
+        return 0;
+    }
+    memset(&vm, 0, sizeof(vm));
+    ret = syscfg_read(APP_NO_DISTURB_VM_ID, &vm, sizeof(vm));
+    if (ret != (int)sizeof(vm) || vm.magic != APP_NO_DISTURB_MAGIC ||
+        vm.version != APP_NO_DISTURB_VERSION || !app_no_disturb_cfg_valid(vm.cfg)) {
+        memset(cfg, 0, APP_NO_DISTURB_CFG_LEN);
+        return 0;
+    }
+    memcpy(cfg, vm.cfg, APP_NO_DISTURB_CFG_LEN);
+    return 1;
+}
+
+uint8_t app_no_disturb_storage_save(const uint8_t cfg[APP_NO_DISTURB_CFG_LEN])
+{
+    AppNoDisturbVm_t vm;
+
+    if (!app_no_disturb_cfg_valid(cfg)) {
+        return 0;
+    }
+    memset(&vm, 0, sizeof(vm));
+    vm.magic = APP_NO_DISTURB_MAGIC;
+    vm.version = APP_NO_DISTURB_VERSION;
+    memcpy(vm.cfg, cfg, APP_NO_DISTURB_CFG_LEN);
+    return (uint8_t)(syscfg_write(APP_NO_DISTURB_VM_ID, &vm, sizeof(vm)) ==
+                     (int)sizeof(vm));
 }
 
 static uint8_t app_no_disturb_weekday_monday0(const struct sys_time *time)
@@ -66,15 +102,6 @@ static uint8_t app_no_disturb_day_selected(uint8_t weekday)
     return (uint8_t)((s_no_disturb.weekdays_mask & (1U << weekday)) != 0U);
 }
 
-void app_no_disturb_configure(uint8_t enable, uint8_t weekdays_mask,
-                              uint16_t start_minute, uint16_t end_minute)
-{
-    s_no_disturb.enabled = !!enable;
-    s_no_disturb.weekdays_mask = weekdays_mask & 0x7fU;
-    s_no_disturb.start_minute = start_minute;
-    s_no_disturb.end_minute = end_minute;
-}
-
 uint8_t app_no_disturb_is_active_at(const struct sys_time *time)
 {
     uint8_t weekday;
@@ -83,12 +110,10 @@ uint8_t app_no_disturb_is_active_at(const struct sys_time *time)
     if (!time || !s_no_disturb.enabled || !s_no_disturb.weekdays_mask ||
         s_no_disturb.start_minute >= APP_MINUTES_PER_DAY ||
         s_no_disturb.end_minute >= APP_MINUTES_PER_DAY ||
-        time->month < 1U || time->month > 12U ||
-        time->day < 1U || time->day > 31U ||
-        time->hour > 23U || time->min > 59U) {
+        time->month < 1U || time->month > 12U || time->day < 1U ||
+        time->day > 31U || time->hour > 23U || time->min > 59U) {
         return 0;
     }
-
     weekday = app_no_disturb_weekday_monday0(time);
     now_minute = (uint16_t)(time->hour * 60U + time->min);
 
@@ -118,51 +143,3 @@ uint8_t app_no_disturb_is_active(void)
     }
     return app_no_disturb_is_active_at(&time);
 }
-
-uint8_t app_no_disturb_storage_load(uint8_t data[APP_NO_DISTURB_DATA_LEN])
-{
-    AppNoDisturbVm_t vm;
-    int ret;
-
-    if (!data) {
-        return 0;
-    }
-    memset(&vm, 0, sizeof(vm));
-    ret = syscfg_read(CFG_USER_NO_DISTURB, (uint8_t *)&vm, sizeof(vm));
-    if (ret != (int)sizeof(vm) || !app_no_disturb_vm_valid(&vm)) {
-        s_saved_valid = 0;
-        return 0;
-    }
-    memcpy(data, vm.data, APP_NO_DISTURB_DATA_LEN);
-    memcpy(s_saved_data, vm.data, APP_NO_DISTURB_DATA_LEN);
-    s_saved_valid = 1;
-    return 1;
-}
-
-uint8_t app_no_disturb_storage_save(const uint8_t data[APP_NO_DISTURB_DATA_LEN])
-{
-    AppNoDisturbVm_t vm;
-    int ret;
-
-    if (!data) {
-        return 0;
-    }
-    if (s_saved_valid &&
-        !memcmp(s_saved_data, data, APP_NO_DISTURB_DATA_LEN)) {
-        return 1;
-    }
-
-    memset(&vm, 0, sizeof(vm));
-    vm.magic = APP_NO_DISTURB_VM_MAGIC;
-    vm.version = APP_NO_DISTURB_VM_VERSION;
-    vm.length = APP_NO_DISTURB_DATA_LEN;
-    memcpy(vm.data, data, APP_NO_DISTURB_DATA_LEN);
-    vm.checksum = app_no_disturb_checksum(vm.data);
-    ret = syscfg_write(CFG_USER_NO_DISTURB, (uint8_t *)&vm, sizeof(vm));
-    if (ret != (int)sizeof(vm)) {
-        return 0;
-    }
-    memcpy(s_saved_data, data, APP_NO_DISTURB_DATA_LEN);
-    s_saved_valid = 1;
-    return 1;
-}

apps/usr_app/app_no_disturb.h

@@ -4,14 +4,14 @@
 #include <stdint.h>
 #include "system/sys_time.h"
 
-#define APP_NO_DISTURB_DATA_LEN  13U
+#define APP_NO_DISTURB_CFG_LEN  13
 
-/* weekdays_mask bit 0..6 means Monday..Sunday. */
+/* DP7: bytes 2..8 are Monday..Sunday, byte 1 is reserved. */
 void app_no_disturb_configure(uint8_t enable, uint8_t weekdays_mask,
                               uint16_t start_minute, uint16_t end_minute);
+uint8_t app_no_disturb_storage_load(uint8_t cfg[APP_NO_DISTURB_CFG_LEN]);
+uint8_t app_no_disturb_storage_save(const uint8_t cfg[APP_NO_DISTURB_CFG_LEN]);
 uint8_t app_no_disturb_is_active(void);
 uint8_t app_no_disturb_is_active_at(const struct sys_time *time);
-uint8_t app_no_disturb_storage_load(uint8_t data[APP_NO_DISTURB_DATA_LEN]);
-uint8_t app_no_disturb_storage_save(const uint8_t data[APP_NO_DISTURB_DATA_LEN]);
 
 #endif /* __APP_NO_DISTURB_H__ */

apps/usr_app/app_power.c

@@ -36,14 +36,21 @@
 #define BAT_BOOT_MS   3000  /* 上电 3s 内不因低电深睡 */
 #define BAT_LOG_MS    10000
 #define BAT_PERIODIC_LOG_ENABLE 0 /* Production standby must not wake UART periodically. */
+#define CHG_ON_CONFIRM_MS        50u
+#define CHG_OFF_CONFIRM_MS       150u
+#define CHG_FULL_RECHECK_MS      1000u
 #define BAT_LOW_WIN   3     /* 连续约 2.4s 才进低电告警（仅闪灯，不关机） */
 
-/** 充电检测：CHG/VPWR 消抖后的结果 */
+/** TP4056 CHRG/STDBY debounced charging state. */
 typedef struct {
     uint8_t  usb_online;
-    uint8_t  charge_led;      /**< 0=无 1=充电红 2=充满绿 */
-    uint8_t  charge_led_last; /**< 仅用于变化时打日志 */
-    uint16_t full_ms;         /**< 拔电瞬间 CHG 先变高，需等满 1s 才当充满 */
+    uint8_t  charge_led;
+    uint8_t  charge_led_last;
+    uint16_t charging_ms;
+    uint16_t unplugged_ms;
+    uint16_t full_ms;
+    uint16_t full_recheck_ms;
+    uint8_t  full_latched;
 } AppChargeState_t;
 
 /** 电量采样：滑动平均 + 百分比 */
@@ -221,7 +228,7 @@ static void power_do_poweroff(void *priv)
 }
 
 /**
- * @brief  充电检测：CHG 低=充电中；VPWR 在且 CHG 高满 1s=充满；拔电报 USB_OUT
+ * @brief  TP4056 CHRG/STDBY 组合检测，稳定状态变化后报告 USB 事件
  * @param  dt 距上次调用的毫秒数
  * @return USB 插拔边沿事件
  */
@@ -229,37 +236,71 @@ static AppPowerEvt_t power_charge_tick(uint16_t dt)
 {
     AppChargeState_t *c = &s_power.charge;
     uint8_t chg_low = bsp_chg_is_low();
-    uint8_t vpwr = bsp_vpwr_is_online();
-    uint8_t usb;
+    uint8_t stby_low = bsp_stby_is_low();
+    uint8_t usb = c->usb_online;
     AppPowerEvt_t evt = APP_POWER_EVT_NONE;
 
-    if (chg_low) {
-        /* CHG 拉低：正在充电，红灯 */
+    if (chg_low && stby_low) {
+        /* 00 is invalid: keep the previous stable state. */
+        c->charging_ms = 0;
+        c->unplugged_ms = 0;
         c->full_ms = 0;
+        c->full_recheck_ms = 0;
+    } else if (!chg_low && !stby_low) {
+        /* 11: charger absent. */
+        c->charging_ms = 0;
+        c->full_ms = 0;
+        c->full_recheck_ms = 0;
+        c->unplugged_ms = app_add_ms(c->unplugged_ms, dt);
+        if (c->unplugged_ms >= CHG_OFF_CONFIRM_MS) {
+            c->charge_led = 0;
+            c->full_latched = 0;
+            usb = 0;
+        }
+    } else if (chg_low) {
+        /* 01: charging. */
+        c->unplugged_ms = 0;
+        c->full_ms = 0;
+        if (c->full_latched) {
+            c->charging_ms = 0;
+            c->full_recheck_ms = app_add_ms(c->full_recheck_ms, dt);
+            if (c->full_recheck_ms >= CHG_FULL_RECHECK_MS) {
+                c->full_latched = 0;
                 c->charge_led = 1;
-        gDevData.charge = CHARGE_1;
+            }
             usb = 1;
-    } else if (vpwr) {
-        /* VPWR 在但 CHG 已高：可能是充满，也可能是拔电瞬间 CHG 先变高。
-         * 等满 BOARD_CHG_FULL_MS 才当真充满，避免拔电误报绿灯 */
+        } else {
+            c->full_recheck_ms = 0;
+            c->charging_ms = app_add_ms(c->charging_ms, dt);
+            if (c->charging_ms >= CHG_ON_CONFIRM_MS) {
+                c->charge_led = 1;
+                usb = 1;
+            }
+        }
+    } else {
+        /* 10: charge complete. */
+        c->charging_ms = 0;
+        c->unplugged_ms = 0;
+        c->full_recheck_ms = 0;
+        if (c->full_latched) {
+            c->charge_led = 2;
+            usb = 1;
+        } else {
             c->full_ms = app_add_ms(c->full_ms, dt);
             if (c->full_ms >= BOARD_CHG_FULL_MS) {
                 c->charge_led = 2;
-        }
-        gDevData.charge = (c->charge_led == 1) ? CHARGE_1 : CHARGE_2;
+                c->full_latched = 1;
                 usb = 1;
-    } else {
-        /* USB 不在位：充电灯灭 */
-        c->full_ms = 0;
-        c->charge_led = 0;
-        gDevData.charge = CHARGE_2;
-        usb = 0;
             }
+        }
+    }
+
+    gDevData.charge = (c->charge_led == 1) ? CHARGE_1 : CHARGE_2;
 
     if (usb != c->usb_online) {
         c->usb_online = usb;
-        log_info("usb %s vpwr=%d chg=%d mv=%d pair=%d goto=%d\n",
-                 usb ? "in" : "out", vpwr, chg_low, bsp_vpwr_mv(),
+        log_info("charge input %s chg_low=%d stby_low=%d pair=%d goto=%d\n",
+                 usb ? "in" : "out", chg_low, stby_low,
                  usr_get_pair_flag(), usr_var.usr_goto_pair);
         usr_var.usr_power_charge_flag = usb ? 1 : 2;
         if (usb) {
@@ -272,10 +313,10 @@ static AppPowerEvt_t power_charge_tick(uint16_t dt)
 
     if (c->charge_led != c->charge_led_last) {
         c->charge_led_last = c->charge_led;
-        log_info("charge_led=%d chg=%d vpwr=%d mv=%d\n",
-                 c->charge_led, chg_low, vpwr, bsp_vpwr_mv());
+        log_info("charge_led=%d chg_low=%d stby_low=%d\n",
+                 c->charge_led, chg_low, stby_low);
         if (c->charge_led == 2) {
-            /* 硬件（CHG+VPWR 满 BOARD_CHG_FULL_MS）判定充满，电量强制收尾到
+            /* STDBY 持续为低满 BOARD_CHG_FULL_MS 后判定充满，电量强制收尾到
              * 100%，避免电压拟合曲线因基准/温漂等原因走不到 100% 就卡住 */
             app_battery_set_percent(100);
             s_power.sample.pct = 100;

apps/usr_app/car_audio_test.c

@@ -0,0 +1,51 @@
+/******************************************************************************
+ * @file    car_audio_test.c
+ * @brief   Car audio hardware test using the SDK key-tone sine path.
+ *
+ * Notes:
+ * - The SDK sine sample rate is 16 kHz; points is the PCM sample count.
+ * - freq is specified as actual frequency * 512.
+ * - decay=0 keeps amplitude constant for observing DAC/PA end behavior.
+ * - The parameter array has static storage because playback is asynchronous.
+ ******************************************************************************/
+
+
+#include <stdint.h>
+#include "system/includes.h"
+#include "tone_player.h"
+#include "application/audio_dec_app.h"
+#include "car_audio_test.h"
+#include "app_audio_debug.h"
+
+static uint16_t s_car_audio_restart_guard_ms;
+
+int Car_Audio_Test_Play(void)
+{
+    /* bird.mp3 is packed as a standalone file in the internal resource area. */
+    int ret;
+    MAGIC_AUDIO_LOG("鸟叫接口进入：资源=%s，当前播放状态=%d",
+                    SDFILE_RES_ROOT_PATH"bird.mp3", audio_key_tone_is_play());
+    ret = audio_key_tone_play_name(SDFILE_RES_ROOT_PATH"bird.mp3", 1);
+    MAGIC_AUDIO_LOG("鸟叫请求返回=%d（0仅表示请求已提交，不代表已经出声）", ret);
+    return ret;
+}
+
+
+void Car_Audio_Test_Loop(uint16_t dt_ms)
+{
+    if (s_car_audio_restart_guard_ms > dt_ms) {
+        s_car_audio_restart_guard_ms -= dt_ms;
+        return;
+    }
+
+    if (audio_key_tone_is_play()) {
+        return;
+    }
+
+    if (Car_Audio_Test_Play() == 0) {
+        /*
+         * 防止播放请求刚入队、SDK 尚未更新播放状态时被重复提交。
+         */
+        s_car_audio_restart_guard_ms = 50;
+    }
+}

apps/usr_app/car_audio_test.h

@@ -0,0 +1,26 @@
+/******************************************************************************
+ * @file    car_audio_test.h
+ * @brief   Car audio hardware test API using the SDK key-tone sine path.
+ ******************************************************************************/
+#include <stdint.h>
+#ifndef __CAR_AUDIO_TEST_H__
+#define __CAR_AUDIO_TEST_H__
+
+/**
+ * @brief Play the bird-call MP3 stored in the internal resource area.
+ *
+ * The API only queues a request. Playback is asynchronous in the SDK key-tone
+ * task; it does not wait for completion or block the caller. This test is not
+ * triggered automatically; call it explicitly from test code.
+ *
+ * @return 0=request queued; negative value=module unavailable/request failed.
+ */
+int Car_Audio_Test_Play(void);
+
+/**
+ * @brief 开机状态下维护循环测试音。
+ * @param dt_ms 距离上次调用的毫秒数
+ */
+void Car_Audio_Test_Loop(uint16_t dt_ms);
+
+#endif /* __CAR_AUDIO_TEST_H__ */

apps/usr_jb_proto/Protocol/jb_product.c

@@ -30,7 +30,6 @@ static volatile uint32_t timerMs;
 #define JB_DND_START_MIN_OFFSET            10
 #define JB_DND_END_HOUR_OFFSET             11
 #define JB_DND_END_MIN_OFFSET              12
-
 static void jbNoDisturbApply(uint8_t *cfg)
 {
     uint8_t i;
@@ -67,7 +66,7 @@ void userInit(void)
     gDevData.beep_trig = 0;       /* DP4 声音开关 0=关 1=开 */
     gDevData.battery = 0;       /* DP5 电量上报 */
     gDevData.shake_wake = 0;       /* DP6 震动触发开机 0=关 1=开 */
-    memset(gDevData.no_disturb_enable, 0, 13);  /* DP7 勿扰模式开关 */
+    memset(gDevData.no_disturb_enable, 0, APP_NO_DISTURB_CFG_LEN);  /* DP7 勿扰模式开关 */
     app_no_disturb_storage_load(gDevData.no_disturb_enable);
     gDevData.charge = 0;       /* CHARGE_0 (不支持充电) */
     gDevData.reserva_dp3 = 0;       /* DP10 预留DP3 */
@@ -148,19 +147,12 @@ int8_t jbEventProcess(jb_event_info_t *info, jb_data_point_t *ctrl)
                 break;
 
             /* ── DP7 勿扰模式开关 (raw) ── */
-            case DP_ID_NO_DISTURB_ENABLE: {
-                uint8_t previous[JB_DND_LEN];
-
-                memcpy(previous, gDevData.no_disturb_enable, JB_DND_LEN);
+            case DP_ID_NO_DISTURB_ENABLE:
                 memcpy(gDevData.no_disturb_enable, ctrl->no_disturb_enable,
                        JB_DND_LEN);
                 jbNoDisturbApply(gDevData.no_disturb_enable);
-                if (memcmp(previous, gDevData.no_disturb_enable, JB_DND_LEN) &&
-                    !app_no_disturb_storage_save(gDevData.no_disturb_enable)) {
-                    printf("dnd vm write failed\n");
-                }
+                app_no_disturb_storage_save(gDevData.no_disturb_enable);
                 break;
-            }
 
             /* ── DP10 预留DP3 (uint32) ── */
             case DP_ID_RESERVA_DP3:

apps/usr_jb_proto/usr_jb_main.c

@@ -36,6 +36,7 @@
 
 #include "system/includes.h"
 #include "app_config.h"
+#include "asm/dac.h"
 #include "app_main.h"
 #include "app_task.h"
 #include "user_cfg.h"
@@ -52,11 +53,13 @@
 #include "app_pair.h"
 #include "app_boot.h"
 #include "app_function.h"
+#include "app_audio_debug.h"
 #include "app_mode.h"
 #include "app_led.h"
 #include "key_manager.h"
 #include "asm/power/power_api.h"
 
+
 #define LOG_TAG_CONST APP
 #define LOG_TAG       "[USR_JB]"
 #define LOG_INFO_ENABLE
@@ -285,6 +288,13 @@ void usr_jb_init(void)
 {
     usr_log_boot_version(); /* UART 已在 app_main 起来，按键判定前就能看到版本 */
 
+    MAGIC_AUDIO_LOG("诊断固件启动：编译=%s %s，UART0使能=%d，TX引脚编号=%u，波特率=%u",
+                    __DATE__, __TIME__, TCFG_UART0_ENABLE,
+                    (unsigned)TCFG_UART0_TX_PORT, (unsigned)TCFG_UART0_BAUDRATE);
+    MAGIC_AUDIO_LOG("配置：提示音=%d，MP3=%d，DAC=%d，DAC通道=%d，DAC模式=%d，音量类型=%d",
+                    TCFG_KEY_TONE_EN, TCFG_DEC_MP3_ENABLE, TCFG_AUDIO_DAC_ENABLE,
+                    TCFG_AUDIO_DAC_CONNECT_MODE, TCFG_AUDIO_DAC_MODE, SYS_VOL_TYPE);
+    MAGIC_AUDIO_LOG("鸟叫资源路径=%s，中文显示请使用UTF-8", SDFILE_RES_ROOT_PATH"bird.mp3");
     bsp_hw_init();
     app_led_init(); /* 提前到按键判定之前：3s/5s/拒绝开机低电闪都要直接用灯效事件表 */
 

apps/usr_periph/board_pin.h

@@ -26,7 +26,7 @@
 
 #define BOARD_LED_ENABLE          1             /**< 1=红绿 LED */
 #define BOARD_KEY_ENABLE          1             /**< 1=按键 PB1 */
-#define BOARD_CHG_ENABLE          1             /**< 1=充电检测 PG8 + VPWR */
+#define BOARD_CHG_ENABLE          1             /**< 1=TP4056: PG8 CHRG + PC5 STDBY */
 #define BOARD_MOTOR_ENABLE        1             /**< 1=双电机 U13 + U18 */
 #define BOARD_SHAKE_ENABLE        1             /**< 1=震动输入 PA3 */
 
@@ -39,14 +39,16 @@
 #define BOARD_RIGHT_BACKWARD_PIN  IO_PORTC_03   /**< U18-INA，右轮后退 */
 #define BOARD_RIGHT_FORWARD_PIN   IO_PORTC_04   /**< U18-INB，右轮前进 */
 #define BOARD_SHAKE_PIN           IO_PORTA_03   /**< 震动开机，常闭开关断开时高脉冲有效 */
-#define BOARD_LED_RED_PIN         IO_PORTA_08   /**< 红灯 LED_PWR，低电平亮 */
-#define BOARD_LED_GREEN_PIN       IO_PORTA_07   /**< 绿灯 LED_CHG，低电平亮 */
+#define BOARD_LED_RED_PIN         IO_PORTA_07   /**< 红灯 LED_PWR，低电平亮 */
+#define BOARD_LED_GREEN_PIN       IO_PORTA_08   /**< 绿灯 LED_CHG，低电平亮 */
 #define BOARD_KEY_PIN             IO_PORTB_01   /**< 按键，低电平按下 */
-#define BOARD_CHG_PIN             IO_PORTG_08   /**< ME4054 CHG，外部 2.2k 上拉 */
+#define BOARD_CHG_PIN             IO_PORTG_08   /**< TP4056 CHRG, active low, internal pull-up */
+#define BOARD_STDBY_PIN           IO_PORTC_05   /**< TP4056 STDBY, active low, internal pull-up */
 
 #define BOARD_LED_ON_LEVEL        0             /**< LED 点亮电平：0=低亮 */
 #define BOARD_KEY_ACTIVE_LEVEL    0             /**< 按键有效电平：0=按下为低 */
 #define BOARD_CHG_CHARGING_LEVEL  0             /**< CHG 充电中为低 */
+#define BOARD_STDBY_FULL_LEVEL    0             /**< STDBY 充满时为低 */
 
 #define BOARD_SHAKE_ACTIVE_LEVEL  1             /**< 常闭震动开关：断开时高脉冲有效 */
 
@@ -62,9 +64,9 @@
 #define BOARD_VBAT_LOW_HYST_MV       50           /**< 低电恢复回差 */
 #define BOARD_VBAT_SHUTDOWN_MV      3250          /**< 约 5%，仅开机拦截用：关机状态下 app_battery 尚未运行，只能摸裸电压 */
 #define BOARD_BATTERY_SHUTDOWN_PCT  5             /**< 运行中显示电量 <= 此值才自动关机，跟 APP 看到的百分比对齐 */
-#define BOARD_VPWR_ONLINE_MV        4000          /**< VPWR 判定 USB 插入 */
-#define BOARD_VPWR_OFF_MV           1500          /**< 低于此值认定已拔出 */
-#define BOARD_CHG_FULL_MS           1000          /**< CHG 已高且 VPWR 在，满 1s 认充满 */
+#define BOARD_VPWR_ONLINE_MV        4000
+#define BOARD_VPWR_OFF_MV           1500
+#define BOARD_CHG_FULL_MS           1000          /**< STDBY low confirmation time */
 
 /*============================================================================*/
 /* 按键 / 灯效                                                                */
@@ -124,8 +126,7 @@
 #define BOARD_SHAKE_TRIGGER_WINDOW_MS       250u /**< 保留窗口参数，便于恢复多脉冲策略 */
 #define BOARD_SHAKE_POLL_MS                 10u  /**< 与业务调度器共用的采样节拍 */
 
-/* PG8/CHG_ON is the only fitted USB-related signal that changes while the
- * product is in softoff; VPWR is disconnected on boards with R18 not fitted. */
+/* PG8/CHRG is used to detect charge insertion while in softoff. */
 #define BOARD_CHG_WAKEUP_INDEX                 3u
 
 #endif /* __BOARD_PIN_H__ */

apps/usr_periph/bsp_hw.c

@@ -233,13 +233,20 @@ BspHw_Ret_t bsp_hw_init(void)
 #if BOARD_CHG_ENABLE
     /* PORTG 作数字输入必须开 dieh，否则读不到 ME4054 CHG */
     gpio_disable_fun_output_port(BOARD_CHG_PIN);
-    gpio_set_pull_up(BOARD_CHG_PIN, 0);
+    /* ME4054 CHRG is open-drain/high-Z when not charging.  Keep PG8 pulled
+     * high so the digital input has a deterministic level in that state. */
+    gpio_set_pull_up(BOARD_CHG_PIN, 1);
     gpio_set_pull_down(BOARD_CHG_PIN, 0);
     gpio_set_die(BOARD_CHG_PIN, 1);
     gpio_set_dieh(BOARD_CHG_PIN, 1);
     gpio_direction_input(BOARD_CHG_PIN);
-    adc_add_sample_ch(AD_CH_LDO5V);
-    adc_set_sample_freq(AD_CH_LDO5V, 500);
+
+    gpio_disable_fun_output_port(BOARD_STDBY_PIN);
+    gpio_set_pull_up(BOARD_STDBY_PIN, 1);
+    gpio_set_pull_down(BOARD_STDBY_PIN, 0);
+    gpio_set_die(BOARD_STDBY_PIN, 1);
+    gpio_set_dieh(BOARD_STDBY_PIN, 1);
+    gpio_direction_input(BOARD_STDBY_PIN);
 #endif
 
 #if BOARD_MOTOR_ENABLE
@@ -423,6 +430,16 @@ uint8_t bsp_chg_is_low(void)
 #endif
 }
 
+/** @return 1 when TP4056 STDBY is low; otherwise 0. */
+uint8_t bsp_stby_is_low(void)
+{
+#if BOARD_CHG_ENABLE
+    return (uint8_t)(gpio_read(BOARD_STDBY_PIN) == BOARD_STDBY_FULL_LEVEL);
+#else
+    return 0;
+#endif
+}
+
 /**
  * @brief  读取电池电压
  * @return 电池电压，单位 mV

apps/usr_periph/bsp_hw.h

@@ -101,6 +101,9 @@ uint8_t bsp_key_is_pressed(void);
  */
 uint8_t bsp_chg_is_low(void);
 
+/** @return 1 when TP4056 STDBY is low; otherwise 0. */
+uint8_t bsp_stby_is_low(void);
+
 /**
  * @brief  读取电池电压
  * @return 电池电压，单位 mV

cpu/br28/tools/download/earphone/RS-5B88.key

@@ -1 +0,0 @@
-3DBA0ACD41A68B534365C721F7B23619914B4106E1024B5592A0A49D1DD417152E4DCF18

cpu/br28/tools/download/earphone/download_app_ota.bat

@@ -4,6 +4,7 @@ cd %~dp0
 
 copy ..\..\script.ver .
 copy ..\..\tone.cfg .
+copy ..\..\bird.mp3 .
 copy ..\..\p11_code.bin .
 copy ..\..\br28loader.bin .
 copy ..\..\ota.bin .
@@ -15,7 +16,7 @@ if not exist p11_code.bin (
     exit /b 1
 )
 
-set "ISD_CMD=..\..\isd_download.exe ..\..\isd_config.ini -tonorflash -dev br28 -boot 0x120000 -div8 -wait 300 -uboot ..\..\uboot.boot -app ..\..\app.bin -res ..\..\cfg_tool.bin tone.cfg p11_code.bin -uboot_compress"
+set "ISD_CMD=..\..\isd_download.exe ..\..\isd_config.ini -tonorflash -dev br28 -boot 0x120000 -div8 -wait 300 -uboot ..\..\uboot.boot -app ..\..\app.bin -res ..\..\cfg_tool.bin tone.cfg bird.mp3 p11_code.bin -uboot_compress"
 
 if not exist RS-5B88.key (
     echo [download] ERROR: RS-5B88.key not found

docs/branch-index.md

@@ -1,62 +0,0 @@
-# SOC 代码生成模板 — 分支索引
-
-本仓库按 **「厂商-型号」** 组织分支，每个分支是一套完整的 SOC 工程模板。
-
-远程仓库：[soc-codegen-template](https://git.jianbao-tech.com/pets-device/soc-codegen-template)
-
----
-
-## 分支列表
-
-| 分支 | 厂商 | 型号 | 平台 | 默认能力 | 状态 |
-|------|------|------|------|----------|------|
-| [`JieLi-JL7016`](https://git.jianbao-tech.com/pets-device/soc-codegen-template/src/branch/JieLi-JL7016) | 杰理 JieLi | JL7016 / AC7016C | BR28 | 耳机 SDK + BLE + jb_protocol + OTA | ✅ 可用 |
-
-> 新模板上线后在此表追加一行即可。
-
----
-
-## 如何获取某 SOC 模板
-
-### 见宝工具箱 / 自动化脚本
-
-```bash
-git clone https://git.jianbao-tech.com/pets-device/soc-codegen-template.git
-cd soc-codegen-template
-git checkout JieLi-JL7016
-```
-
-### 仅下载指定分支（浅克隆）
-
-```bash
-git clone --branch JieLi-JL7016 --single-branch \
-  https://git.jianbao-tech.com/pets-device/soc-codegen-template.git jl7016-template
-```
-
----
-
-## 分支命名规范
-
-```
-<厂商>-<型号>
-```
-
-示例：`JieLi-JL7016`、`JieLi-AC701N`
-
-- 默认包含耳机应用与 jb_protocol，分支名**不加**多余后缀
-- 同一芯片多种工程结构差异过大时，再考虑加后缀：`JieLi-JL7016-dongle`
-
----
-
-## 新增 SOC 模板（维护者）
-
-1. 从 `main` 拉新分支：`git checkout -b <厂商>-<型号> main`
-2. 合入该 SOC 完整工程（apps + cpu + include_lib + tools）
-3. 更新本文件分支表 + `main/README.md` 快速索引
-4. 推送分支并在 Gitea 设为受保护分支（可选）
-
----
-
-## 各分支 README
-
-每个 SOC 分支根目录有独立的 `README.md`（构建、打包、协议对接说明）。

include_lib/system/syscfg_id.h

@@ -172,7 +172,6 @@ u8 *syscfg_ptr_read(u16 item_id, u16 *len);
 #define     CFG_USER_PLAN_INFO1          25+1
 
 #define     CFG_USER_BATTERY_LEVEL       26+1
-#define     CFG_USER_NO_DISTURB           28
 
 
 #define 	CFG_USER_DEFINE_END			49

改动日志.md

@@ -0,0 +1,49 @@
+# 改动日志
+
+日期：2026-09-08
+
+## 本次 MAGIC_BOX_FW 音频与充电对齐
+
+1. 文件：`apps/earphone/board/br28/board_jl701n_demo_cfg.h`
+   - 行号：104，369（修改后行号以当前文件为准）
+   - 原代码：`TCFG_KEY_TONE_EN` 为 `DISABLE`；DAC 模式为 `DAC_MODE_L_SINGLE`。
+   - 修改后：启用 `TCFG_KEY_TONE_EN`；DAC 模式改为 `DAC_MODE_H2_SINGLE`。
+   - 原因：启用 SDK key-tone 播放任务，并匹配 FK_CAR_FW 使用 ROUT 单端输出的配置。
+
+2. 文件：`apps/usr_app/app_function.c`
+   - 行号：约 26、254-259
+   - 原代码：模式改变时只调用 `app_led_request_mode_blink()`。
+   - 修改后：模式改变且 `mode != PLAY_MODE_0` 时调用 `Car_Audio_Test_Play()`。
+   - 原因：每次实际切换到运行模式时播放一次鸟叫；不放入 1ms tick，因此不会连续调用。
+
+3. 文件：`apps/usr_app/car_audio_test.c`、`apps/usr_app/car_audio_test.h`
+   - 原代码：MAGIC_BOX_FW 未纳入该音频测试模块。
+   - 修改后：加入 FK_CAR_FW 当前版本的鸟叫播放接口，路径为 `mnt/sdfile/res/bird.mp3`。
+   - 原因：提供模式切换调用的播放实现。
+
+4. 文件：`Makefile`
+   - 行号：约 414
+   - 原代码：源文件列表不含 `apps/usr_app/car_audio_test.c`。
+   - 修改后：加入该源文件。
+   - 原因：确保编译、链接播放接口实现。
+
+5. 文件：`cpu/br28/tools/download/earphone/download_app_ota.bat`
+   - 行号：约 5、18
+   - 原代码：未复制 `bird.mp3`，资源参数只有 `tone.cfg p11_code.bin`。
+   - 修改后：复制 `bird.mp3`，并在 `-res` 参数中加入 `bird.mp3`。
+   - 原因：将鸟叫文件打包进内部资源区。
+
+6. 文件：`cpu/br28/tools/bird.mp3`
+   - 原代码：MAGIC_BOX_FW 中缺少可供下载脚本复制的鸟叫文件。
+   - 修改后：加入当前 FK_CAR_FW 使用的 `bird.mp3`。
+   - 原因：提供资源打包输入文件。
+
+说明：MAGIC_BOX_FW 当前 `app_power.c` 的充电状态主逻辑已经是 CHRG+STDBY 组合检测，与当前 FK_CAR_FW 一致；本次未重复改写该逻辑，保留其 VPWR 辅助函数未被应用层使用。
+
+7. 文件：`apps/earphone/board/br28/board_jl701n_demo_cfg.h`
+   - 行号：825
+   - 原代码：`#define TCFG_DRC_ENABLE 0 /*DRC .../`（块注释未闭合）。
+   - 修改后：将该注释改为合法的 `/*DRC */`。
+   - 原因：首次完整编译发现该处导致 `line 828: expected identifier or '('`，属于当前工程已有的语法错误，必须修复后才能验证本次功能。
+
+8. 同一配置文件第1197行：补齐损坏的 `#error` 字符串结束引号，消除预处理语法错误。