pets-device/mcu-codegen-template
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

添加普冉 PY32F040 OTA 双工程代码生成模板

Browse Source 
Co-authored-by: Cursor <cursoragent@cursor.com>
This commit is contained in:
wuchuyuan
2026-08-18 18:59:56 +08:00
co-authored by Cursor
commit 331864dc64
496 changed files with 329040 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Drivers/BSP/PY32F003xx_Start_Kit/py32f003xx_Start_Kit.h
+179
View File
@@ -0,0 +1,179 @@
/**
******************************************************************************
* @file py32f003xx_Start_Kit.h
* @author MCU Application Team
* @brief This file provides set of firmware functions to manage Leds,
* push-button available on Start Kit.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2023 Puya Semiconductor Co.
* All rights reserved.</center></h2>
*
* This software component is licensed by Puya under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef PY32F003_START_KIT_H
#define PY32F003_START_KIT_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "py32f0xx_hal.h"
/** @addtogroup BSP
* @{
*/
/** @defgroup py32f0xx_Start_Kit
* @brief This section contains the exported types, contants and functions
* required to use the Nucleo 32 board.
* @{
*/
/** @defgroup py32f0xx_Start_Kit_Exported_Types Exported Types
* @{
*/
typedef enum
{
LED3 = 0,
LED_GREEN = LED3
} Led_TypeDef;
typedef enum
{
BUTTON_USER = 0,
/* Alias */
BUTTON_KEY = BUTTON_USER
} Button_TypeDef;
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
} ButtonMode_TypeDef;
#define LEDn 1
#define LED3_PIN GPIO_PIN_5
#define LED3_GPIO_PORT GPIOB
#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define LEDx_GPIO_CLK_ENABLE(__INDEX__) do {LED3_GPIO_CLK_ENABLE(); } while(0U)
#define LEDx_GPIO_CLK_DISABLE(__INDEX__) LED3_GPIO_CLK_DISABLE())
#define BUTTONn 1
/**
* @brief User push-button
*/
#define USER_BUTTON_PIN GPIO_PIN_12
#define USER_BUTTON_GPIO_PORT GPIOA
#define USER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define USER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define USER_BUTTON_EXTI_IRQn EXTI4_15_IRQn
/* Aliases */
#define KEY_BUTTON_PIN USER_BUTTON_PIN
#define KEY_BUTTON_GPIO_PORT USER_BUTTON_GPIO_PORT
#define KEY_BUTTON_GPIO_CLK_ENABLE() USER_BUTTON_GPIO_CLK_ENABLE()
#define KEY_BUTTON_GPIO_CLK_DISABLE() USER_BUTTON_GPIO_CLK_DISABLE()
#define KEY_BUTTON_EXTI_IRQn USER_BUTTON_EXTI_IRQn
#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == 0) USER_BUTTON_GPIO_CLK_ENABLE();} while(0)
#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? USER_BUTTON_GPIO_CLK_DISABLE() : 0)
#ifdef HAL_UART_MODULE_ENABLED
//debug printf redirect config
#define DEBUG_USART_BAUDRATE 115200
#define DEBUG_USART USART2
#define DEBUG_USART_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN);\
UNUSED(tmpreg); \
} while(0U)
#define __GPIOA_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN);\
UNUSED(tmpreg); \
} while(0U)
#define DEBUG_USART_RX_GPIO_PORT GPIOA
#define DEBUG_USART_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define DEBUG_USART_RX_PIN GPIO_PIN_3
#define DEBUG_USART_RX_AF GPIO_AF4_USART2
#define DEBUG_USART_TX_GPIO_PORT GPIOA
#define DEBUG_USART_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define DEBUG_USART_TX_PIN GPIO_PIN_2
#define DEBUG_USART_TX_AF GPIO_AF4_USART2
#define DEBUG_USART_IRQHandler USART2_IRQHandler
#define DEBUG_USART_IRQ USART2_IRQn
#endif
/************************************************************/
#ifdef HAL_UART_MODULE_ENABLED
extern UART_HandleTypeDef DebugUartHandle;
#endif
/** @defgroup Functions
* @{
*/
uint32_t BSP_GetVersion(void);
void BSP_LED_Init(Led_TypeDef Led);
void BSP_LED_DeInit(Led_TypeDef Led);
void BSP_LED_On(Led_TypeDef Led);
void BSP_LED_Off(Led_TypeDef Led);
void BSP_LED_Toggle(Led_TypeDef Led);
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
void BSP_PB_DeInit(Button_TypeDef Button);
uint32_t BSP_PB_GetState(Button_TypeDef Button);
void BSP_USART_Config(void);
#define DEBUG_USART_Config BSP_USART_Config
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* PY32F003_START_KIT_H */
/************************ (C) COPYRIGHT Puya *****END OF FILE****/